768206
34
Zoom out
Zoom in
Previous page
1/52
Next page
10.0 DISPLAY SETUP SETTINGS
34 R699820 - Yunzi Series User Manual
9.8 Environment Setting
To finely tune the picture setting, you may change the environment settings so that they match your installation:
Screen size: diagonal size in inches set this setting between 60” and 200”.
Viewing distance is the distance to the screen of the nearest seat in meters, set it between 1m and 10m.
•Wall color, select “Dark” if the walls are black or similar, for any lighter shades select “Light”.
10.0DISPLAY SETUP SETTINGS
Back Color
Configures the screen color displayed when there is no active input. Set to Blue or Black.
Menu Position
Upper left, Upper right, Center, Lower right, Lower left.
Menu Display
15sec: Display menu for 15 seconds before fade out.
On: Always display menu.
Line Display
5sec: Display the input settings for 5 seconds after input selection.
Off: Don’t display.
Source Display
On: Display the source of the input signals after input selection.
Off: Don’t display.
Logo
On: Display D-ILA logo during startup for 5 seconds.
Off: Don’t display.
Language
Choose the OSD language between: English, Japanese, German, Spanish, Italian, French, Portuguese, Dutch,
Swedish, Norwegian, Russian and Chinese.
11.0FUNCTION SETTINGS
11.1 Trigger
The 12V trigger output can be used to control any compatible devices such as motorized screens or anamorphic
kits: The 12V trigger output is 12Vcc, 100mA. Select the trigger output behavior:
Off: 12V trigger voltage state is always low.
On (Power):12V trigger state is high when the projector is powered ON. To be used with motorized screens.
On(Anamo): 12V trigger is high only when Anamorphic Mode A or Mode B is engaged. To be used with
motorized anamorphic kits.
11.2 Off-Timer
You can configure this automatic power Off function that will switch off the projector when there is no operation or
after a determined timer. Choose the duration of the timer between: Off, 1 hour, 2 hours, 3 hours and 4 hours.
11.3 High Altitude Mode
Select this when the projector is in a location of low atmospheric pressure. On or Off.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Yunzi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Yunzi in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info