Manual Dr. Kern Tancan 4000 (page 7 of 13) (English)

499407

Zoom out

Zoom in

1/13

ÄInstallation of the exhaust unit

Remove the following parts of the exhaust unit (E) from

package 4:

-Ceiling plate (17) with integral central fan and

operating panel (18)

- Exhaust duct (19) with two bypass hoses (20)

These two parts must be bolted together. To do this,

remove the pre-assembled bolts (21) from the ceiling

plate (17), place the exhaust duct with its attachment

holes in position on the ceiling plate, and then refit the

bolts (21) (Fig. 12).

Fig. 12

Fig. 13

Note: The operating panel (18) must not be bolted to the

lower plate yet!

The complete exhaust unit is now lifted onto the tanning

elements (Fig. 13).

Now place the attachment holes in the exhaust unit over

the matching holes in the tanning elements.

Use 6 hex-head bolts (22) with washers (23) from the

accessory pack to bolt the exhaust unit in place (Fig. 14)

Fig. 14

Now bolt the operating panel (18) to the lower ceiling

plate (Fig. 13), using the bolts provided in the accessory

pack.

The following auxiliary elements are built into to ceiling

plate of the TAN CAN 8000

- 2 air jets for the head area

- 2 loudspeakers for connection to an external audio

system

- control unit

Fig. 15

Å Installing the door element

Remove the door element (C) from package 3.

Note: The retaining bolt (25) for the castor, and the

upper and lower bearings (27) and (32) are already

fitted to the door element (Figs. 16 - 18).

Fig. 16

Fig. 17

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Tancan 4000 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dr. Kern Tancan 4000 Manual

Product: