Manual Dr. Kern Tancan 4000 (page 6 of 13) (English)

499407

Zoom out

Zoom in

1/13

Fig. 6

ÃInstalling the tanning elements

preassembled in steps 2 and 3

Installation of the right element

Lift the element and place it in the tongues provided

(13 + 1) in the baseplate (Figs. 6 and 7).

Note!

The element will need to be held in place by one

person.

Fig. 7

Installation of the left element

Lift the element and place the lower right side on the

installation plate of the stand foot (7) (Fig. 8).

Fig. 8

Now lift the stand foot (8) on the lower left side into the

positioning tongue (14) in the baseplate (Fig. 9).

The current assembly condition is shown in Fig. 10.

Fig. 9

Fig. 10

Bolting together the two elements at stand foot (7).

For this step, you will need two M10 nuts (5) and 2 lock-

washers (6) from the accessory pack (Fig. 8).

Bolting together the two elements at the top

For this step, you will need the installation plate (15), 4 nuts

(5) and 4 lock-washers (6) from the accessory pack.

M10 bolts (16) are provided in the upper sections of both

elements. Place the installation plate with its holes over

the bolts (16), and fix it firmly in place using the nuts (Fig.

11.

The two tanning elements are now assembled.

Note: Check the correct position in relation to the

baseplate and the aligned position!

Note! Both elements must be held in the upright position

until they are bolted together.

Fig. 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Tancan 4000 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dr. Kern Tancan 4000 Manual

Product: