Manual Dovre Sense 203GA (page 48 of 204) (English, German, Dutch, French, Spanish)

745853

Zoom out

Zoom in

1/204

Subject to change because of technical improvements

09-20021-365

Placing the stove

Preferably place the stove on a flat floor. The appli-

ance is fitted with adjustable feet in the floor plate

so that the appliance can be adjusted and made per-

fectly level.

Take the distance from combustible material into

account. See the appendix "Distance from com-

bustible material".

Determining the duct route

Make a drawing of the route you want the concentric

exhaust duct to follow.

Check whether the duct route you want is per-

mitted from a technical point of view based on the

appendix “Calculation sheet for checking projected

route”. If this is not the case, you must decide on

an alternative route that is within the limits per-

mitted.

Decide on the type and number of the parts

required. Use the appendix “Overview of con-

centric flue gas exhaust materials” for this.

Attaching a restriction plate

Depending on the route selected and the ratio

between vertical and horizontal length, a restriction

plate must be attached to the stove at the right place

and in the right position. To adjust the restriction plate

properly, you should first remove the baffle plate; see

the following figure.

09-20021-368

Positioning the restriction plate serves to

adjust the draft in the stove to the duct route

selected.

The restriction plate has three settings.

Position 1: Restriction plate removed,

Position 2: breakable part removed (35mm),

Position 3: restriction plate fully positioned

(50mm); see the following figure. If you decided on

a permitted duct route, the correct position for the

restriction plate follows from the appendix “Cal-

culation sheet for checking projected route”.

09-20021-364

Preparing the connection to

the flue

When connecting the stove to the flue, you can

choose to connect to the top or to the back of the

stove.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre Sense 203GA in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre Sense 203GA Manual

Product: