Manual Dovre 2576CBS (page 37 of 164) (English, German, Dutch, French, Italian, Spanish)

571221

Zoom out

Zoom in

1/164

H Fireproof ceiling

I Combustible ceiling

J Convection air outlet

K Insulation

L. Fireproof floor

M Combustible floor

N Opening to prevent pressure build-up

O Connection pipe

Finish

1. Put all dismantled parts back into the appliance in

their correct places.

2. Ensure that the newly built hearth is dry enough

before firing the stove.

Never light a fire in the appliance without the

fireproof inner plates.

The appliance is now ready for use.

Use

First use

When you use the appliance for the first time, make

an intense fire and keep it going for a good few hours.

This will cure the heat-resistant paint finish. This may

result in some smoke and odours. You could open

windows and doors for a while in the area where the

appliance is located.

Fuel

This appliance is only suitable for the burning of

natural wood; sawn and chopped wood that is

sufficiently dry.

Do not use other fuels, as they can lead to serious

damage to the appliance.

You are not allowed to use the following fuels, as they

pollute the environment and because they heavily soil

the appliance and flue, which may lead to a chimney

fire:

Treated wood, such as scrap wood, painted wood,

impregnated wood, preserved wood, plywood and

chipboard.

Plastics, scrap paper and domestic waste.

Wood

Hardwood, such as from oaks, beeches, birches

and fruit trees, is the ideal fuel for your stove. This

type of wood burns slowly with calm flames.

Softwood contains more resins, burns faster and

gives off more sparks.

Use dried wood that contains no more than 20%

moisture. The wood must have dried for at least 2

years.

Saw the wood to size and split it when it is still

fresh. Fresh wood is easier to split, and split wood

dries more easily. Store the wood under a roof

where the wind has wind free access.

Do not use damp wood. Damp logs do not produce

heat as all of the energy is used in the evaporation

of the moisture. This will result in a lot of smoke

and soot deposits on the door of the appliance and

in the chimney. The water vapour will condense in

the appliance and can leak away through chinks in

the appliance, causing black stains on the floor. It

may also condense in the chimney and form

creosote. Creosote is a highly flammable

compound and may cause a chimney fire.

Lighting

You can check whether the flue has enough draught

by lighting a ball of paper above the baffle plate. A cold

flue often does not have enough draught and

consequently, some smoke may escape into the room

instead of up the chimney. By lighting the fire in the

way described here, you can avoid this problem.

1. Stack two layers of medium sized logs crosswise.

2. Stack two layers of kindling crosswise on top of

the logs.

3. Place a firelighter cube in the lower layer of

kindling and light the cube according to the

instructions on the packaging.

Subject to change because of technicalimprovements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2576CBS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 28,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 2576CBS Manual

Product: