Manual Dovre 2576CBS (page 39 of 164) (English, German, Dutch, French, Italian, Spanish)

571221

Zoom out

Zoom in

1/164

The primary air slide (A) regulates the air below the

grate. The secondary air slide (B) regulates the air for

the glass (air wash).

Turn the air slide (A) to the left to open it; see next

figure.

Turn the air slide (B) to the right to open it; see next

figure.

The appliance is fitted with a double baffle plate with

permanent vent holes to ensure secondary

combustion.

Advice

Never burn wood with an open door.

Regularly burn wood with intense roaring fires.

If you frequently have low intensity fires, tar

and creosote may be deposited in the chimney.

Tar and creosote are highly combustible

substances. Thicker layers of these

substances might catch fire when the

temperature in the chimney increases

suddenly and steeply. Therefore it is

necessary for the fire to regularly burn very

intensely, so that layers of tar and creosote

disappear.

Low intensity fires also cause tar deposits on

the stove window and door.

When the outside temperature is not very low,

it is better to burn wood intensely for a few

hours instead of having a low intensity fire for a

long period of time.

Control the air supply with the secondary air inlet.

The secondary air inlet not only supplies air to

the fire but to the glass as well, so that it does

not get dirty so quickly.

Open the primary air inlet for the time being if the air

supply by the secondary air inlet is inadequate or if

you want to fan the fire.

It is better to add a small amount of logs regularly

than to add many logs at the same time.

Extinguishing the fire

Do not add fuel and just let the fire go out. If a fire is

damped down by reducing the supply of air, harmful

substances will be produced and released. Therefore,

let the fire go out naturally. Keep an eye on the fire

until it has gone out. When the fire has died

completely, all air inlets can be closed.

Removing ashes

After wood has been burnt, a relatively small amount

of ash remains behind. This bed of ash is a good

insulator for the fire plate and gives better combustion.

So you can leave a thin layer of ash on the fire plate.

The flow of air through the fire plate must not be

obstructed, however, and no ash may be allowed to

accumulate behind a cast-iron inner plate. Remove

the excess ash regularly.

Removing ash in models 2175 and

2575

1. Open the door of the appliance.

2. Scoop the excess ash from the appliance or use a

special ash vacuum cleaner to remove the excess

ash.

Subject to change because of technicalimprovements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2576CBS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 28,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 2576CBS Manual

Product: