Manual Dovre 2576CBS (page 36 of 164) (English, German, Dutch, French, Italian, Spanish)

571221

Zoom out

Zoom in

1/164

The top of the convection space must be closed

airtight by means of a closing plate of

incombustible and heat-resistant material.

The cover plate must be level and placed at least

30 cm below the flue opening in the ceiling.

Air inlet grates must be fitted at the bottom of the

hearth to allow ambient air to flow in. The minimum

air inlet vent is 250 cm

. If the space is not

sufficiently ventilated, you must provide for outside

air to be allowed in by means of the outside air

connection kit or an optional adjustable damper.

Air outlet grates must be fitted at the top of the

hearth and just below the cover plate. The

minimum air outlet opening is 500 cm

The inlet and outlet grates are available as

options.

Do not use combustible material in the

convection space, and avoid the effect of

thermal bridging when using materials that

conduct heat.

Follow the instructions below when building the

hearth:

1. Build the base of the hearth and fit the air inlet

grates into the masonry.

You can place the air inlet grates on all sides of

the base.

Make sure the door of the appliance can swing

freely over the hearth floor.

2. Build up the hearth up to the smoke dome.

Ensure that a clearance of 2 mm is maintained

between the stove and the masonry to

accommodate the thermal expansion of the

stove.

3. The inside of the convection space may, if

desired, be cladded with reflective, insulating

material.

Additional cladding of the convection space

prevents unnecessary thermal radiation

towards outer walls and/or adjacent rooms. It

also prevents damage to the insulation in the

walls of the hearth.

4. Build the rest of the hearth up to the flue gas hole

in the ceiling.

The masonry may not rest on the stove. Use a

support such as a steel beam. Leave a

clearance of at least 3 mm between the

support and the appliance.

5. Close the convection space with the cover plate.

6. Put the air outlet grates under the cover plate.

7. Make an opening above the cover plate in order to

prevent any pressure build-up.

The figure below shows an example of the placing of a

stove in a hearth built in accordance with the

instructions given above.

L M

09.20015.043

A Chimney (flue)

B Gasket

C Cover plate

D Insulation 10 cm

E Fireproof wall min. 10 cm (e.g. cellular concrete)

F Combustible wall

G Convection space

Subject to change because of technicalimprovements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2576CBS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 28,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 2576CBS Manual

Product: