4
1. Unpacking
After removal from the cardboard packaging, make sure the
appliance is not damaged. If you find damage to the
2. View of the appliance
IN CASE IF YOUR REFRIGERATOR IS EQUIPPED WITH LOCK, DOMETIC Zrt DO NOT ACCEPT LIABILITY FOR
LOSS OR DAMAGE OF KEYS. HOWEVER A COMPLETE LOCK CAN BE SUPPLIED.
Figure 1
GB
appliance resulting from transport, report it immediately
to the transportation firm.
3. Cleaning
Clean the refrigerator thoroughly at intervals, as
necessary. Remove the shelves; these, the cabinet
interior and the door should be washed with a warm
solution of sodium bi-carbonate. Finally wipe over with a
cloth rinsed in warm water only, and dry with a clean cloth.
Do not wash any plastic parts in water that is more than
hand warm, and do not expose them to dry heat. The
outside of the cabinet should be wiped down regularly
with a clean, damp cloth.
NEVER USE STRONG CHEMICALS OR ABRASIVE
CLEANING MATERIALS ON ANY PART OF THE
CABINET.
DS301H
DS601H
IMPORTANT NOTIFICATION
The 3 trays of the appliance shall be placed by respecting the indicated positions as on Picture.
A ferrite ring serving for EMC compatibility is mounted on the wire of the digital thermometer's sensor.
Do not remove the ferrite ring!
1. Door lock
2. Door
3. Evaporator
4. Thermometer
5. Cooling unit room cover
6. Interior light
7. Fan (housing)
8. Upper tray (Cutout on Upper Left Corner of Front Plate)
9. Middle tray (With Highest Front Plate)
10. Lower tray (Injection-moulded Compact Component)
11. Footframe
12. Sensor of Fuzzy Logic
13. Sensor of thermometer
