Manual Dolmar PB-7600.4 (page 17 of 136) (English, German, Dutch, French, Italian, Spanish)

507652

Zoom out

Zoom in

1/136

4. Cleaning the fuel filter

• Clogged fuel filter may cause difficulty of start-up or failure of engine speed

increase.

• Check the fuel filter regularly as follows:

(1) Remove the fuel tank cap, drain the fuel to empty the tank. Check the

tank inside for any foreign materials. If any, wipe clean such materials.

(2) Pull out the fuel filter with wire through the oil filling port.

(3) If the fuel filter surface is contaminated, clean it with gasoline. Foul

gasoline must be disposed of according to the method specified by

each local authority. Excessively foul filter must be replaced.

(4) Reset the fuel filter in the fuel tank and tighten firmly the fuel tank cap.

For replacement, contact your dealership or an authorized service

agent.

5. Inspection of bolts, nuts and screws

• Retighten loose bolts, nuts, etc.

• Check for fuel and oil leakage.

• Replace damaged parts with new ones for safety operation.

6. Cleaning of parts

• Keep the engine always clean.

• Keep the cylinder fins free of dust or dirt. Dust or dirt adhering to the fins

will cause seizure.

• Blowing air is taken in from the air inlet netዊWhen airflow has dropped

down during operation, stop engine and inspect the air inlet net for blocking

by obstacles.

• Note that failure to remove any such obstacles may result in the engine

becoming overheated and damaged.

WARNING :

Never use the blower without the net of the blower. Before each use,

check that the net is attached in place and is free from any damage.

7. Replacement of gaskets and packings

In reassembling after the engine is dismounted, be sure to replace the gaskets and packings with new ones.

Any maintenance of adjustment work that is not included and described in this manual is only to be performed by Authorized Service Agents.

STORAGE

፧

Drain up fuel from the fuel tank and carburetor according to the following

procedure:

(1) Remove the fuel tank cap, and drain fuel completely.

If there is any foreign matter remaining in the fuel tank, remove it

completely.

(2) Pull out the fuel filter from the refill port using a wire.

(3) Push the primer pump until fuel is drained from there, and drain fuel

coming into the fuel tank.

(4) Reset the filter to the fuel tank, and securely tighten the fuel tank cap.

(5) Then, continue to operate the engine until it stops.

(6) Remove the spark plug, and drip several drops of engine oil through the

spark plug hole.

(7) Gently pull the starter handle so that engine oil will spread over the

engine, and attach the spark plug.

(8) During storage, please keep the machine upright.

(9) Keep the drained fuel in a special container in a well-ventilated shade.

WARNING

• When draining the fuel, be sure to stop the engine and confirm that the engine cools down.

− Just after stopping the engine, it may still hot with possibility of burns, inflammability and fire.

DANGER

• When the machine is kept out of operation for a long time, drain up all fuel from the fuel tank and carburetor, and keep it at a dry and

clean place.

Fuel tank cap

Fuel filter

Hose clamp

ir inlet net

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar PB-7600.4 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dolmar PB-7600.4 Manual

Product: