507649
17
Zoom out
Zoom in
Previous page
1/28
Next page
17
- Remove the Þ lter cover and air Þ lter (see "Cleaning the
air Þ lter").
- To enable hot-air induction from the cylinder, remove the
plug (A/1) using the universal wrench.
NOTE:
Keep the plug in the saw’s tool kit. You must put the plug back
in at temperatures above 0° C / 32° F.
- Reinstall the air Þ lter and Þ lter cover.
- The snow Þ lter (B/1, see “Accessories”) prevents the induc-
tion of powder snow. It is placed under the preÞ lter (B/2).
NOTE:
Remove the snow Þ lter before working at temperatures above
0° C (32° F)!
When not in use, store the snow Þ lter in the assembly tool
pouch.
Handle heating
(electric, special equipment for model 110i H and 115i H)
The electrically heated handles are activated by pushing the
switch (B/3).
Switch up - ON
Switch down - OFF
The chain needs sharpening when:
- The sawdust produced when sawing damp wood looks
like wood ß our.
- The chain penetrates the wood only under great pressure.
- The cutting edge is visibly damaged.
- The saw is pulled to the left or right when sawing. This is
caused by uneven sharpening of the chain.
Important: Sharpen frequently, but without removing too
much metal!
Generally, 2 or 3 strokes of the Þ le will be enough.
Have the chain resharpened at a service centre when you
have already sharpened it yourself several times.
D
Proper sharpening:
CAUTION:
Use only chains and guide bars designed for this saw (see
the Extract from the spare-parts list)!
- All cutters must be of the same length (dimension a). Cutters
with different lengths result in rough running of the chain and
can cause cracks in the chain.
- The minimum cutter length: 0.11" (3 mm). Do not resharpen
the chain when the minimum cutter length has been reached;
at this point, the chain must be replaced (see the Extract
from the spare-parts list and "Replacing the saw chain").
- The depth of the cut is determined by the difference in height
between the depth limiter (round nose) and the cutting
edge.
- The best results are obtained with a depth-limiter depth of
.025" (0.64 mm).
CAUTION:
Excessive depth increases
the risk of kickback!
MAINTENANCE
Sharpening the saw chain
CAUTION:
Before doing any work on the guide bar or chain, always
switch off the engine and pull the plug cap off the spark
plug (see "Replacing the spark plug"). Always wear protec-
tive gloves!
C
B
3
2
1
.025"
(0,64 mm)
.025"
(0,64 mm)
Working in winter
In order to prevent carburetor icing in conditions of low tem-
perature combined with high humidity, and in order to get up
to operating temperature faster in subfreezing temperatures,
heated air can be taken from the cylinder.
At temperatures above freezing the carburetor must NOT be
fed heated air.
Failure to follow these instructions can lead to damage
to the cylinder and piston!
A
1
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar 115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar 115 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dolmar 115

Dolmar 115 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info