513362

DKN XC-140i Manual

10
Zoom out
Zoom in
Previous page
1/112
Next page
10
Conseils de Sécurité
Veuillez lire attentivement cette notice de conseils avant de débuter votre premier entraînement sur l’appareil. Conservez précieusement cette
notice pour information, pour les travaux d’entretien ainsi que pour l’éventuelle commande de pièces de rechange.
Suivre exactement la notice de montage de l’appareil. N’utilisez à cet effet que les pièces originales.
Avant de procéder au montage, veuillez vérifier le contenu du carton.
N’utilisez que des outils appropriés et faîtes-vous éventuellement aider par une deuxième personne lors du montage.
Posez l’appareil sur un support plat et non glissant. L’utilisation prolongée de l’appareil dans des pièces humides est interdite afin d’éviter une possible
corrosion.
Avant la première utilisation et à intervalles réguliers (tous les 1 ou 2 mois), veuillez vérifier que l’état de l’appareil est bon et que l’assemblage des
pièces est solide.
Pour l’entretien et les réparations, n’utilisez que des pièces de rechange d’origine.
Si des doutes ou des questions persistent, adressez-vous à votre revendeur spécialisé.
Limites d’appareil: 140 kg.
N’utilisez aucun produit de nettoyage agressif et évitez de laisser pénétrer des liquides dans l’appareil.
Assurez-vous que la mise en service n’ait lieu qu’après un montage conforme et une vérification de l’appareil.
Tenez compte, pour les parties réglables, des positions maximales.
L’appareil est conçu pour un entraînement d’adultes.
Assurez-vous que les enfants ne puissent l’utiliser sans la surveillance d’adultes.
Avertissez les personnes présentes des éventuels dangers, liés par exemple aux pièces détachables, lors des entraînements.
Reportez-vous à la notice d’entraînement pour des conseils quant au contenu des entraînements.
Avant de démarrer l’entraînement, adressez-vous à votre médecin : il sera en mesure de vous indiquer quels types d’exercices vous
conviennent, ainsi que le niveau de difficultés.
Le manuel d'utilisation ne sert que d'information au consommateur.
Le fournisseur ne peut être tenu responsable d'éventuelles erreurs de traduction ou d'éventuelles modifications techniques du produit.
Les données sont indicatifs et ne peuvent être appliqués dans aucune utilisation medical.
… 10 …


Need help? Post your question in this forum.

Forumrules
1

Forum

dkn-xc-140i

Reset search

  • In use there is a loud bang when the footrest axle on the flywheel side passes the 9 o'clock position. Sounds as if something is catching or binding and the loud bang occurs when it's released. I've removed the footrests and the plastic casing to expose the belt, magnetic drive and the flywheel but not the plastic covers on the flywheel. When the flywheel is rotated with just the free crank axle the loud bang occurs when, on the flywheel side, the crank passes the 9o'clock position. However, despite careful inspection when the flywheel is rotating no obstruction or binding can be seen. All I can suggest is that the noise is in someway related to turning of the flywheel axle. Haven't removed the retaining nut to the axle as I don't have a socket that fits and it seems to be the only nut near part No 71 on the schematic that is not numbered. Two questions:
    1. what is the size of the retaing nut on the flywheel axle?
    2. Any knowledge/suggestions as to what is causing the noise?
    Anthony Submitted on 29-12-2021 at 18:20

    Reply Report abuse

    • More information from original submitter:
      Managed to find an old box spanner and was able to remove the two end nuts on the large flywheel pulley. Wasn't able to remove the flywheel pulley on the opposite side to the belt drive. However, did manage to remove and then refit the rubber drive belt. When the drive belt is off, the flywheel pulley rotates easily, fast and, more importantly, there is no loud bang - I'm assuming that a ball race is fitted on the axle which indicates to me that it is in good condition. When the rubber belt was refitted and the flywheel turned the loud bang returned when the foot rest axle passed the 9 o'clock position!!! How do you remove the flywheel pulleys? Answered on 30-12-2021 at 14:24

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DKN XC-140i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DKN XC-140i in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info