590981

Dirt Devil INFINITY REBEL 53 - DD5551 Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
13
3 Maintenance and care
GB
3 Maintenan ce and care
3.1 Emptying and cleaning the dust container
1. Switch off the appliance ( ).
2. Pull the plug out of the plug socket.
3. Remove the dust container (Fig. 17).
4. Empty the dust container (Fig. 18).
5. At this point you can also check the components inside the dust con-
tainer:
- Main cyclone (Fig. 19 – 20),
- Filter screen (Fig. 21) and
- Reflector (Fig. 22).
6. If these 3 dust container components (Fig. 19 – 22) are dirty, clean them
under running cold or hand-warm water until all soiling has been re-
moved (Fig. 23 – 25).
7. Leave the dust container components to dry after cleaning them with
water (approx. 24 hours at room temperature).
8. Put the dust container components back in (Fig. 26 – 29).
9. Replace the dust container (Fig. 30).
You should feel and hear it clicking into place.
19
16 17
30
18
25
24
23
26
22
29
28
20
21
27
NOTE:
The dust container has to be emptied and cleaned regularly. Otherwise
emptying will get harder and harder or smells and bacteria might develop,
depending on what you have vacuumed up.
Therefore, it is best to empty the dust container after each vacuuming
session.
Empty and clean the dust container at the latest when the cleaning/
emptying display lights up (Fig. 16).
Also empty and clean the dust container every 3 months at the latest
before storing for a long time or before sending the appliance.
CAUTION:
Switch off the appliance before removing the dust container. This will
prevent dust from damaging the appliance.
NOTE:
You can dispose of the dust container with your regular domestic trash
as long as it contains no waste materials prohibited in domestic trash.
The 3 dust container components from the interior of the dust container
are washable (Fig. 23 – 25), but they are dishwasher safe.
Also, do not use cleaning agents or brushes with hard bristles to
clean the dust container components.
Leave the dust container components to dry after cleaning them with
water (approx. 24 hours at room temperature). Only put the components
back into the appliance when they are completely dry.
Replace damaged or deformed filters immediately (Order informa-
tion, see ZChapter 3.4, ‘Spare parts and accessories’).
The dust container cannot be washed! If the dust container comes into
contact with water, soiling can adhere to the inside.
The dust container components are constructed so that they will only go
all the way down if in the right position. Do not use force upon insertion.
Lower the reflector completely in the dust container (Fig. 26). Make
sure that its recess engages precisely in the protuberance of the dust
container.
Lock the filter screen by tightening it approx. 3 – 4 rotations in clock-
wise motion (Fig. 27).
Lock the main cyclone by tightening it approx. 15° in anti-clockwise
motion (Fig. 28 and 29).
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil INFINITY REBEL 53 - DD5551 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil INFINITY REBEL 53 - DD5551 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info