590981
12
Zoom out
Zoom in
Previous page
1/24
Next page
12
2Use
2Use
2.1 Assemble appliance and adjust nozzles to surface
1. Assemble the appliance and accessory parts depending on the surface
you want to vacuum clean (Fig. 1 – 8).
2. Ensure that the bypass vent is shut (Fig. 5).
3. If you use the telescopic tube (Fig. 6), adjust its length (Fig. 7).
4. If you use the floor nozzle (Fig. 8), set it to the floor to be cleaned
(Fig. 9 hard floor, Fig. 10 carpet).
2.2 Vacuum cleaning
1. Pull the cable out of the appliance (Fig. 11) and plug into a socket.
2. Switch on the appliance using the on/off switch ( ) (Fig. 14).
3. Vacuum clean (Fig. 15).
click!
1
3
5
6
7
10
8
2
4
9
click!
WARNING:
Danger of injury! Only attach the appliance parts when the appliance is
not connected to the power supply. Otherwise the machine might start
up and parts of your body, hair or pieces of clothing might be sucked in.
CAUTION:
Before assembling, make sure that the fitted nozzle suits the surface to
be cleaned. Do not clean e.g. any floors or objects with a brush with
rotating bristles that you would not clean without a second thought with
a conventional brush. Also observe the flooring manufacturer's recom-
mendations.
NOTE:
You might have to twist the parts when connecting them so they are
securely in place. Ensure that installed parts are secure by trying to pull
them apart.
15
13 14
!
12
11
WARNING:
Danger of injury! Check appliance and power cord before each use.
A damaged appliance must never be used.
CAUTION:
Only use the appliance with all filters undamaged, dry and correctly fit-
ted. Make sure that no objects obstruct the telescopic tube, the suction
hose or other openings.
WARNING:
Danger of electric shock! If the red marking shows (Fig. 12) retract the
cord by pressing the retraction button ( ) to pull in the cord up to the
yellow mark (Fig. 13) again. Otherwise, the power cord may be dam-
aged.
NOTE:
The auxiliary air regulator (Fig. 5) must be completely closed for vac-
uum cleaning. With the auxiliary air regulator you can quickly reduce the
suction power, to release objects (such as curtains) that have been
sucked in.
WARNING:
Danger of injury! Especially when vacuum-cleaning stairs make sure
that you always stand on a higher level than the appliance.
NOTE:
Your vacuum cleaner has an integrated protective function that turns off
the appliance before it can overheat (e.g. due to blocked suction paths
or a full dust container), ZChapter 4.1, ‘Before you send in the appli-
ance’.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil INFINITY REBEL 53 - DD5551 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil INFINITY REBEL 53 - DD5551 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info