590981
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
3 Maintenance and care
3.2 Cleaning / changing the motor protection filter
1. Switch off the appliance ( ).
2. Pull the plug out of the plug socket.
3. Remove the dust container (Fig. 17).
4. Open the dust container cover (Fig. 31).
5. Remove the motor protection filter (Fig. 32).
6. Rinse out the motor protection filter thoroughly under running water
(Fig. 33).
7. Leave the filter to dry (approx. 24 hours at room temperature).
8. Put the filter back in (Fig. 33 and 34).
9. Close the dust container cover (Fig. 35). It clicks shut audibly.
3.3 Cleaning / changing the exhaust filter
1. Switch off the appliance ( ).
2. Pull the plug out of the plug socket.
3. Unlock the exhaust filter cover as shown (Fig. 36).
4. Unlock the exhaust filter by pulling the removal tab to the side (Fig. 37).
5. Tap the dirt out of the exhaust filter over a dustbin.
6. Finally, remove the dirt from the exhaust filter with a soft brush, e.g. the
furniture brush supplied with the appliance (Fig. 38).
7. Press the exhaust filter back into its console until the removal tab audi-
bly engages (Fig. 39).
8. Attach the exhaust filter cover at the bottom first.
9. Lock the exhaust filter cover (Fig. 40).
3.4 Spare parts and accessories
You can order accessories and spare parts in various ways:
Ordering address: ZPage 46, ‘International Service’
The following accessories and spare parts can be reordered:
click!
35
3231 34
33
CAUTION:
Clean the filter each time you clean the dust filter. Replace the filter if it
is damaged or deformed (see ZChapter 3.4, ‘Spare parts and accesso-
ries’ for ordering information).
CAUTION:
The filter is washable, but it may not be cleaned in dishwashers or
washing machines. Also, do not use detergents or brushes with hard
bristles. Leave the filters elements to dry after cleaning them with water
(approx. 24 hours at room temperature). Only put the filter back in place
when it is completely dry.
36
click!
39
click!
403437
38
CAUTION:
Clean the filter each time you clean the dust filter. Replace the filter if it
is damaged or deformed (see ZChapter 3.4, ‘Spare parts and accesso-
ries’ for ordering information).
CAUTION:
The exhaust filter cannot be washed.
NOTE:
The exhaust filter cover can be locked more easily if you hold the
unlocking mechanism (Fig. 40) and only release it once the exhaust fil-
ter cover is in its limit position.
CAUTION:
Only use original spare parts from the scope of delivery or those that
you have purchased by reordering.
Item number Description
5551001 Filter set consisting of:
1 motor protection filter (Fig. 33)
1 exhaust filter (Fig. 38)
5510002 Dust container components:
1 main cyclone (Fig. 19 – 20) +
1 filter screen (Fig. 21) +
1 reflector (Fig. 22)
M203-4 1 parquet brush
M208-8 1 turbo brush
M234 1 large upholstery nozzle
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil INFINITY REBEL 53 - DD5551 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil INFINITY REBEL 53 - DD5551 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info