20
©
1999 Directed Electronics, Inc.
The following is a list of the program settings, with the factory
settings in Bold:
■ Active arming (only with the transmitter) or passive arming
(automatic arming 30-seconds after the last door has been
closed).
■ Arming/disarming confirmation siren chirps on or off.
■ The ignition controlled door lock feature on or off: With this
feature on, the doors will lock three seconds after the igni-
tion is turned on, and unlock when the ignition is turned off.
The system can also be programmed to prevent the doors
from locking when the ignition is turned on with any door
open. If your installer is programming the security system
with the DEI Bitwriter or a personal computer and the
TechSoft Programmer, ignition lock and unlock are indepen-
dent features and can be programmed separately.
■ Passive door locking (with passive arming) or active door
locking (only when arming with the remote transmitter).
Passive locking allows the vehicle's doors to lock when the
security system passively arms (after the 30 second count-
down). This feature only works if passive arming has been
programmed.
■ Panic mode enabled/disabled when the ignition is on: Some
states have laws against siren capability in a moving vehicle.
■ Forced passive arming on or off: If your system is pro-
grammed for passive arming and the forced passive arming
feature has been programmed on, the system will passively
arm after one hour, even if a protected entry has been left