Manual Directed Electronics 600 ESP (page 22 of 36) (English)

583788

Zoom out

Zoom in

1/36

1999 Directed Electronics, Inc.

Owner Recognition

Owner Recognition is a feature available exclusively from DEI

Using a DEI

Bitwriter, hand-held programming tool, your dealer

can program many of the system settings. The programmer makes

it possible to program different settings for each transmitter that

is used with the system. Then, whenever a specific transmitter is

used, the system will recall the settings assigned to that trans-

mitter. Owner Recognition lets up to four users of the system have

different settings that meet their specific needs. It is almost like

having four separate alarms in your vehicle, one for each user.

NOTE: Owner Recognition cannot be programmed without a Bitwriter and

the necessary software. Check with your dealer for more information.

Rapid Resume Logic

This DEI

system will store its current state to non-volatile mem-

ory. If power is lost and then reconnected the system will recall

the stored state from memory. This means if the unit is in Valet

Mode and the battery is disconnected for any reason, such as ser-

vicing the car, when the battery is reconnected the unit will still

be in Valet

Mode. This applies to all states of the system includ-

ing arm, disarm, VRS

, and Valet

Mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 600 ESP in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 600 ESP Manual

Product: