Manual Directed Electronics 600 ESP (page 23 of 36) (English)

583788

Zoom out

Zoom in

1/36

1999 Directed Electronics, Inc.

Power Saver Mode

Your security system will automatically enter Power Saver Mode

while armed or in Valet

Mode, after a period of time in which no

operation has been performed. This lowers the current draw to pre-

vent the security system from draining the vehicle’s battery. Power

Saver Mode takes over under the following conditions:

■ Power Saver when the system is armed: After the system has

been armed for 24 hours, the LED will flash at half its normal

rate decreasing the system's current draw.

■ Power Saver in Valet

Mode: When the system enters Valet

Mode the LED illuminates steadily. If the vehicle is not used

(ignition is not turned on) for a period of one hour while the

system is in Valet

Mode, the LED will shut off. If the system

remains in Valet

Mode, the LED will come back on the next

time the ignition is turned on and then back off.

Programming Options

Programming options control what your system does during nor-

mal operation, and require few or no additional parts. However,

some may require additional installation labor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 600 ESP in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 600 ESP Manual

Product: