12
©
1999 Directed Electronics, Inc.
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter! Just
press for 1 second, and you will enter Panic Mode. The siren
will sound and the parking lights will flash for the programmed
siren duration. To stop Panic Mode at any time, press on the
remote transmitter again.
You can prevent your security system from automatically arming
and triggering by using Valet
®
Mode. This is very useful when
washing the vehicle or having it serviced. In Valet
®
Mode, the
security system will not arm, even with the remote transmitter,
but all convenience functions (door locks, trunk release, etc.) will
continue to work normally.
To enter or exit Valet
®
Mode with the Valet
®
switch:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
®
switch within 10 seconds.
The status LED will light solidly if you are entering Valet
®
Mode,
and it will go out if you are exiting Valet
®
Mode.