Manual Directed Electronics 600 ESP (page 15 of 36) (English)

583788

Zoom out

Zoom in

1/36

1999 Directed Electronics, Inc.

and know where the Valet

switch is located. Be sure to check with

the installer for the location of the Valet

switch.

To disarm the security system,

turn the ignition to the "on"

position. Press the Valet

switch

the pre-programmed number of

times (1-5 times) within 15

seconds. The system should now

disarm. If it does not, you may

have waited too long, so turn

the ignition off and on and try

again.

IMPORTANT! The unit can be programmed to respond to 1-5 pulses of

the Valet

switch for the disarm function. Be sure to check with the

installer for the desired programming.

To temporarily turn off the arm or disarm chirps, use Silent Mode

™

Simply press briefly before arming or disarming, and the

confirmation chirp(s) will be eliminated for that one operation

only. If you want the arm/disarm chirps turned off permanently,

your dealer can do this for you.

NOTE: The Warn Away

response to lighter impacts is bypassed if the sys-

tem is armed using Silent Mode. This ensures that no chirps will be emit-

ted by the siren in an area you want chirp-free. The system is still fully

capable of triggering. Only the Warn Away response is bypassed.

Silent Mode

DRW-35

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 600 ESP in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 600 ESP Manual

Product: