Manual Directed Electronics 600 ESP (page 18 of 36) (English)

583788

Zoom out

Zoom in

1/36

1999 Directed Electronics, Inc.

If the bypassed sensor tries to trigger the security system while it

is being bypassed, the 60-minute bypass period will start over.

This ensures that a sensor that is continually triggering will

remain bypassed.

Doors are covered by NPC differently: If the alarm is triggered by

an open door for three full cycles, the doors will be bypassed until

the trigger ceases.

NOTE: Arming and disarming the system does not reset this function!

The only ways to reset a bypassed zone are for it to not trigger for 60

minutes, or to turn on the ignition. If testing your system, it is

important to remember that the NPC

™

programming can cause zones to

be bypassed and appear to stop working. If five chirps are heard when

disarming, NPC

™

has been engaged. If you wish to clear the NPC

™

memory, turn the ignition key on.

NPC is programmable. See Programming Options section of this

guide.

Diagnostics

The microprocessor at the heart of your security system is con-

stantly monitoring all of the switches and sensors that are con-

nected to it. It detects any faulty switches and sensors and pre-

vents them from disabling the entire system. The microprocessor

will also record and report any triggers that occurred during your

absence.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 600 ESP in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 600 ESP Manual

Product: