Manual Dimplex SIK 8TES (page 29 of 72) (English, German, French)

798308

Zoom out

Zoom in

1/72

www.gdts.one 452231.66.34 · FD 9912 EN-9

SIK 6TES - SIK 14TES English

8Start-up

8.1 General Information

To ensure that start-up is performed correctly, it should only be

carried out by an after-sales service technician authorised by

the manufacturer. These measures can also include an addi-

tional warranty under certain conditions (see Warranty)

8.2 Preparation

The following items need to be checked prior to start-up:

The heat pump must be fully connected, as described in

Chapter 7.

The heat source system and the heating circuit must have

been filled and checked.

Dirt traps and breathers must be inserted in the brine inlet

of the heat pump.

All valves that could impair proper flow in the brine and

heating circuits must be open.

The heat pump manager must be adapted to the heating

system in accordance with the controller’s operating in-

structions.

Ensure the condensate outflow functions.

The outflows of the brine and heating water pressure relief

valves must not be impaired.

8.3 Start-up Procedure

The heat pump is started up via the heat pump manager.

ATTENTION!

The heat pump must be started up in accordance with the

installation and operating instructions of the heat pump

manager.

The performance level of the circulating pump must be

adapted to the respective heating system.

The overflow valve must be adjusted to the requirements of the

respective heating system. Incorrect adjustment can lead to

faulty operation and increased energy consumption. We rec-

ommend carrying out the following procedure to correctly ad-

just the overflow valve:

Close all of the heating circuits that may also be closed during

operation so that the most unfavourable operating state - with

respect to the water flow rate - is achieved. This normally

means the heating circuits of the rooms on the south and west

sides of the building. At least one heating circuit must remain

open (e.g. bathroom).

The overflow valve should be opened far enough to produce

the maximum temperature spread between the heating flow

and return flow listed in the table below for the current heat

source temperature. The temperature spread should be meas-

ured as close as possible to the heat pump. The heating ele-

ment of mono energy systems should be disconnected during

start-up.

Heat source

temperature Max. temperature spread

between heating flow and return

flow

From To

-5° C 0° C 10 K

1° C 5° C 11 K

6° C 9° C 12 K

10° C 14° C 13 K

15° C 20° C 14 K

21° C 25° C 15 K

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex SIK 8TES in the language / languages: English, German, French as an attachment in your email.

The manual is 1.91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dimplex SIK 8TES Manual

Product: