695365
34
Zoom out
Zoom in
Previous page
1/76
Next page
English
INSTALLATION MANUAL
!Tip
Prior to placing the appliance, remove the front door and flame baffle plate in order to avoid damages and ease
installation.
Ø
Suspend the appliance over the lip of the wall plate and adjust the fire using the spacers at the back.
Ø
Place the flue pipe and possible rosette.
9.5.1.2 Installing a protective plate for the plasterwork
If the appliance is placed against a plastered wall or a wall with light coloured paint/wash, we recommend
installing the supplied protective plate for the plasterwork. Without this plate, the plasterwork or paint/wash can
be damaged due to high temperatures.
Proceed as follows:
Ø
Allow the protective plate at the back of the flue duct to rest on the appliance.
Ø
Then press the plate against the flue duct.
Ø
Drill 4 small holes (Ø 4 mm) and fix the plate using the supplied screws (see Annex 2, fig. 13).
9.5.1.3 Connection of the flue
In case of the Vidar Wall, the flue can be connected in two ways: drained or non-drained. For this you will have to
use the specially developed conical ring. The required connecting pieces are available through your supplier.
9.5.2 Vidar Triple
9.5.2.1 Placing the appliance
In order to promote a stable set-up, the Vidar Triple is provided with two adjustable feet (see Annex 2, fig. 14).
They are located at the front of the casing and can be adjusted.
9.5.2.2 Connection of the flue
In case of the Vidar Triple, the flue can be connected in two ways: drained or non-drained. For this you will have to
use the specially developed conical ring. The required connecting pieces are available through your supplier.
9.5.3 Instyle Triple L
9.5.3.1 Placing the appliance
In order to promote a stable set-up, the Instyle Triple L is provided with adjustable feet (see Annex 2, fig. 15).
These feet can be adjusted by means of the supplied socket screwdriver.
Ø
Remove the vermiculite from the bottom.
Ø
Turn the socket screwdriver to the right in order to adjust the fire upwards, and to the left to adjust the fire
downwards.
9.5.3.2 Connection of the flue
In case of the Instyle Triple L, it is possible to create a flue without exhaust materials. For this you will have to
create an air-tight connection between the top of the fire and the chimney (see paragraph 5.4.2). In addition, a
drained connecting piece ‘liner kit’ is available in order to achieve a flexible connection.
Proceed as follows:
Ø
Pull the flexible pipe through the chimney.
Ø
Attach the draining connecting piece ‘liner kit’ using the clip binding on the flexible pipe (see Annex 2, fig. 16).
Ø
Push the flexible pipe including connecting piece back in the chimney.
Ø
Slide the fire into place.
Ø
Remove the flame baffle plate if it is already in the correct place in the top of the appliance (see paragraph 9.2.2).
Ø
Insert a hand through the flue hole and grasp the connecting piece.
Ø
Pull the flexible pipe with the connecting piece downwards.
Ø
Clamp the flexible connecting piece to the appliance by bending the 3 clamp strips (see Annex 2, fig. 17).
UK
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dik Geurts Vidar Triple-wall at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dik Geurts Vidar Triple-wall in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dik Geurts Vidar Triple-wall

Dik Geurts Vidar Triple-wall User Manual - English, German, Dutch, French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info