Manual DeWalt DWC410 T 1 (page 34 of 144) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

548835

Zoom out

Zoom in

1/144

ENGLISH

Depth of Cut Adjustment (ﬁ g. 5)

1. Loosen the depth adjustment knob (m) to

release.

2. Move the shoe (n) up or down to desired

position.

3. Tighten the depth adjustment knob.

Wet Cut method (Fig. 1)

WARNING: Do not use wet cut system

unless tool is protected by the PRCD.

WARNING: To reduce the risk of

electric shock, ensure water will not

enter into your tool. Do not touch plug

with wet hands.

1. Follow the instructions described under

Mounting the Wet Cut System.

2. To regulate the water flow, open the water valve

by pivoting the lever (o) away from the unit.

3. To close water valve, push the lever toward the

unit.

Proceed as described below for straight or angled

cuts.

Straight cuts (Fig. 1)

1. Using a marker or grease pencil, mark the area

to be cut.

2. Place the shoe (n) of the saw on the workpiece

ensuring that the blade does not touch the

workpiece.

3. Align the external part of the cutting guide (p)

with the cut outline on the workpiece.

4. Turn the tool on and wait for the blade to reach

its maximum velocity.

5. Move the tool slowly and evenly forward,

following the cut line.

Angled cuts (Fig. 1, 6)

1. Using a marker or grease pencil, mark the area

to be cut.

2. Release the bevel adjustment knob (q) and

move it to the desired angle.

3. After selecting the desired angle, tighten the

bevel adjustment knob to secure the shoe.

4. Align the internal part of the cutting guide (p)

with the cut line on the workpiece.

5. Turn the tool on and wait for the blade to reach

its maximum velocity.

6. Move the tool slowly and evenly forward,

following the cut line.

MAINTENANCE

Your DEWALT power tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

WARNING: To reduce the risk of

injury, turn unit off and disconnect

machine from power source before

installing and removing accessories,

before adjusting or changing

set-ups or when making repairs.

Be sure the trigger switch is in the OFF

position. An accidental start-up can

cause injury.

WARNING: This is a non user

maintenance tool. It has to be

maintained by an official DEWALT

maintainance dealer only.

Lubrication

WARNING: NEVER

spray or in any

other way apply

lubricants or

cleaning solvents

inside the tool.

This may result in personal injury

and can seriously affect the life and

performance of the tool.

DEWALT tools are properly lubricated at the factory

and are ready for use. However, it is recommended

that, once a year, you take or send the tool to a

certified service center for a thorough cleaning and

inspection.

Cleaning

WARNING: Blow dirt and dust out of

the main housing with dry air as often as

dirt is seen collecting in and around the

air vents. Wear approved eye protection

and approved dust mask when

performing this procedure.

WARNING: Never use solvents or

other harsh chemicals for cleaning the

non-metallic parts of the tool. These

chemicals may weaken the materials

used in these parts. Use a cloth

dampened only with water and mild

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DWC410 T 1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeWalt DWC410 T 1 Manual

Product: