551289
26
Zoom out
Zoom in
Previous page
1/97
Next page
21
ENGLISH
en - 6
Two gear selector (fig. A)
Your tool is fitted with a two gear selector (5) to vary
the speed/torque ratio.
1 low speed/high torque
2 high speed/low torque
For speed rates, refer to the technical data.
Always push the two gear selector
completely forward or completely back.
Do not change gears at full speed or during use.
Instructions for use
Always observe the safety instructions
and applicable regulations.
Apply only a gentle pressure to the tool.
Excessive force does not speed up
screwdriving but decreases tool
performance and may shorten tool life.
Follow the recommendations for the
appropriate driving speeds provided by
the manufacturers of self-drilling screws.
Prior to operation:
Make sure your battery pack is (fully) charged.
Insert the appropriate drive accessory.
Select forward or reverse rotation.
Set the appropriate driving depth.
Switching ON and OFF (fig. A)
To run the tool, press the variable speed switch (1).
The pressure exerted on the variable speed
switch determines the tool speed.
To stop the tool, release the variable speed
switch (1).
To lock the tool in OFF-position, move the
forward/reverse slider (2) to the central position.
Screwdriving
For best results, hold the screwdriver with the
hand directly in line with the fastener and press
the variable speed switch with the last one or two
fingers of the hand. This reduces the chance of
the screw slipping from the drive accessory when
pressure is applied.
To drive the fastener, place it on the bit or into
the socket or nutsetter, press the variable speed
switch and push the fastener into the workpiece
with a smooth, continuous motion.
When the fastener is seated, the clutch will
disengage automatically.
Various types of 1/4" hex. bits, holders, sockets and
adaptors are available as an option.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your DEWALT Power Tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Unplug the charger before cleaning the housing
with a soft cloth.
Remove the battery pack before cleaning your
Power Tool.
Keep the ventilation slots clear and regularly
clean the housing with a soft cloth.
Environment
Rechargeable battery pack
This long life battery pack must be recharged when
it fails to produce sufficient power on jobs which
were easily done before. At the end of its technical
life, discard it with due care for our environment:
Run the battery pack down completely, then
remove it from the tool.
NiCd cells are recyclable. Take them to your dealer
or a local recycling station. The collected battery
packs will be recycled or disposed of properly.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW979 T-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW979 T-1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info