546615
23
Zoom out
Zoom in
Previous page
1/100
Next page
21
ENGLISH
- Risk of injury when changing the saw blade with unprotected hands.
- Risk of squeezing ngers when opening the guards.
- Health hazards caused by breathing dust developed when sawing
wood, especially oak, beech and MDF.
The following factors are of inuence to noise production:
- the material to be cut
- the type of saw blade
- the feed force
The following factors are of inuence to dust exposure:
- worn saw blade
- dust extractor with air velocity less than 20 m/s
- workpiece not exactly guided
Under consideration of the factors mentioned above, the dust collecting
efciency is about 95% of breathable dust.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Wear respiratory protection.
Pull the plug from the socket when blade change or any
maintenance is needed.
Keep hands away from cutting area and the blade.
Carrying point.
DATE CODE POSITION
The Date Code, which also includes the year of manufacture, is printed
into the housing.
Example:
2009 XX XX
Year of Manufacture
Package contents
The package contains:
1 Partly assembled machine
1 Rip fence assembly
1 Mitre fence
1 Saw blade
1 Upper blade guard assembly
1 Table insert
1 Blade wrench
1 Arbor wrench
1 Dust extraction adapter
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or accessories which may have
occurred during transport.
Take the time to thoroughly read and understand this manual prior to
operation.
Description ( g. A1 - A3)
A1
1 On/off switch
2 Circuit breaker reset button
3 Hand indentation
4 Table
5 Riving knife
6 Upper blade guard
7 Table insert
8 Parallel rip fence
9 Rip scale indicator
10 Fine adjustment knob
11 Combined elevating and bevel control wheel
12 Bevel lock lever
A2
13 Ripping position lock lever
14 Blade wrench storage
15 Push stick
16 Dust extraction adapter
17 Foot
18 Fence slot
A3
19 Mitre fence
INTENDED USE
Your DW745 jobsite table saw has been designed to perform the sawing
operation of ripping, cross-cutting, bevelling and mitring in wood, wood
products and plastics. This unit is designed for use with a ø 250 mm
carbide tip blade.
WARNING: Do not use the machine for other purposes as
intended.
DO NOT use under wet conditions or in presence of flammable liquids or
gases.
These table saws are professional power tools.
DO NOT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.
Electrical safety
The electric motor has been designed for one voltage only. Always check
that the power supply corresponds to the voltage on the rating plate.
115 V units have to be operated via a failsafe isolating
transformer with an earth screen between the primary and
secondary winding.
Your DEWALT tool is double insulated in accordance with
EN 61029; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a specially prepared
cord available through the DEWALT service organisation.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW745 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW745 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info