546615
21
Zoom out
Zoom in
Previous page
1/100
Next page
19
ENGLISH
TABLE SAW DW745
Congratulations!
You have chosen a D E WALT tool. Years of experience, thorough product
development and innovation make D E WALT one of the most reliable
partners for professional power tool users.
Technical Data
DW745-QS DW745-LX
Voltage V 230 115
Type 1 1
Motor power (input) W 1700 1300
Motor power (output) W 1100 936
No-load speed min
-1
3800 3800
Blade diameter mm 250 250
Blade bore mm 30 30
Blade body thickness mm 2.3 2.3
Riving knife thickness mm 2.3 2.3
Depth of cut at 90° mm 77 77
Depth of cut at 45° mm 57 57
Ripping capacity mm 410 410
Overall dimensions cm 570 x 700 x 466 570 x 700 x 466
Weight kg 22
22
L
PA
(sound pressure) dB(A)
109 109
K
PA
(sound pressure uncertainty) dB(A)
3 3
L
WA
(sound power) dB(A)
96 96
K
WA
(sound power uncertainty) dB(A)
3 3
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
U.K. & Ireland 115 V tools 16 Amperes, mains
NOTE: Switching activity may produce short-term voltage changes or
fluctuations. Under unfavourable conditions in public low-voltage supply
systems impairment of other appliances might appear. Disturbances will
not occur if the impedance is less than 0.25 Ohms. Sockets used for
these power tools shall be fused with 16 Amperes cut-out with an inert
characteristic.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Sharp edges.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW745
DEWALT declares that these products described under “technical data”
are in compliance with:
98/37/EC (until Dec. 28, 2009), 2006/42/EC (from Dec. 29, 2009),
EN 61029-1, EN 61029-2-1.
These products also comply with Directive 2004/108/EC. For more
information, please contact DEWALT at the following address or refer to
the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of DEWALT.
Horst Grossmann
Vice President Engineering and Product Development
DEWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
01.08.2009
Safety instructions
When using stationary power tools, always observe the safety
regulations applicable in your country to reduce the risk of re,
electric shock and personal injury.
Read all of this manual carefully before operating the tool.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp or wet
conditions. Keep the work area well lit (250 - 300 Lux). Do not use
the tool where there is a risk of causing re or explosion, e.g. in the
presence of ammable liquids and gases.
3 Keep children away
Do not allow children, visitors or animals to come near the work area
or to touch the tool or the mains cable.
4 Dress properly
Do not wear loose clothing or jewellery, as these can be caught in
moving parts. Wear protective hair covering to keep long hair out of
the way. When working outdoors, preferably wear suitable gloves
and non-slip footwear.
5 Personal protection
Always use safety glasses. Use a face or dust mask whenever the
operations may produce dust or ying particles. If these particles
might be considerably hot, also wear a heat-resistant apron. Wear
ear protection at all times. Wear a safety helmet at all times.
6 Guard against electric shock
Prevent body contact with earthed or grounded surfaces (e.g. pipes,
radiators, cookers and refrigerators). When using the tool under
extreme conditions (e.g. high humidity, when metal swarf is being
produced, etc.), electric safety can be improved by inserting an
isolating transformer or a (FI) earth-leakage circuit-breaker.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW745 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW745 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info