545001

DeWalt DW710 Manual

22
Zoom out
Zoom in
Previous page
1/80
Next page
TABLE TOP MITRE SAW DW710
Congratulations!
You have chosen a DEWALT Power Tool. Years of experience, thorough
product development and innovation make DEWALT one of the most
reliable partners for professional Power Tool users.
Table of contents
Technical data en - 1
Declaration of conformity en - 1
Safety instructions en - 1
Package contents en - 3
Description en - 3
Electrical safety en - 3
Mains plug replacement (U.K. & Ireland only) en - 3
Using an extension cable en - 3
Assembly and adjustment en - 3
Instructions for use en - 5
Maintenance en - 5
Guarantee en - 6
Technical data
DW710
Voltage V 230
Power input W 1000
Blade diameter mm 250
Blade bore mm 30
Max. blade speed min 2850
Max. cross-cut capacity at 90° mm 125
Max. mitre capacity 45° mm 85
Max. depth of cut 90° mm 50
Max. depth of bevel cross-cut 45° mm 35
Mitre (max. positions) left 48°
right 48°
Bevel (max. positions) left 45°
right 0°
0° mitre
Resulting width at max. height 135 mm mm 45
Resulting height at max. width 50 mm mm 125
45° mitre
Max. width at max. height 90 mm mm 50
Max. height at max. width 100 mm mm 42
45° bevel
Max. width at max. height 40 mm mm 100
Resulting height at max. width 135 mm mm 32
Automatic blade brake time s < 10.0
Weight kg 24
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
Declaration of conformity
DW710
D
EWALT declares that these Power Tools have been designed in
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 61029-1,
prEN 61029-2-11, EN 55014, EN 55014-2, EN 61000-3-2 & EN 61000-3-3.
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
measured according to prEN 61029-2-11:
DW710
L
pA
(sound pressure) dB(A)* 90.8
L
WA
(acoustic power) dB(A) 98.8
* at the operator’s ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to
prEN 61029-2-11:
DW710
<2.5 m/s
2
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
Am Grauen Stein
D-51105 Köln
Germany
Cert. No.
BM 9610641-01
Director Engineering and Product Development
Horst Großmann
DEWALT, Richard-Klinger-Straße 40,
D-65510, Idstein, Germany
Safety instructions
When using Power Tools, always observe the safety regulations
applicable in your country to reduce the risk of fire, electric shock and
personal injury. Read the following safety instructions before attempting
to operate this product. Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose Power Tools to humidity. Keep work area well lit. Do
not use Power Tools in the presence of inflammable liquids or gases.
3 Guard against electric shock
Prevent body contact with earthed surfaces (e.g. pipes, radiators,
cookers and refrigerators).
For use under extreme conditions (e.g. high humidity, when metal
swarf is being produced, etc.) electric safety can be improved by
inserting an isolating transformer or a (FI) earth-leakage circuit-breaker.
ENGLISH
en - 1 12
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt DW710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt DW710 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info