546470
20
Zoom out
Zoom in
Previous page
1/92
Next page
20
ENGLISH
Do not use any stands for mounting the tool to
a support.
Do not disassemble or block any parts of the
fastener driving tool such as the safety yoke.
Prior to each operation check that the safety and
triggering mechanism is functioning properly and
that all nuts and bolts are tight.
Do not use the equipment as a hammer.
Never point any operational fastener driving tool
at yourself or at any other person. Do not use the
tool in applications requiring operation close to
the body.
While working, hold the tool in such a way that
no injuries can be caused to the head or to the
body in the event of a possible recoil due to
a disruption in the energy supply or hard areas
within the workpiece.
Never actuate the fastener driving tool into free
space.
Consider the conditions in the work area.
Fasteners can penetrate thin workpieces or slip
off corners and edges of the workpiece, and thus
put people at risk.
Do not drive fasteners close to the edge of the
workpiece.
Do not drive fasteners on top of other fasteners.
In the work area, carry the tool at the workplace
using only one handle, and never with the trigger
actuated.
Unload the tool after use and before performing
any maintenance.
The following pictograms are shown on the tool:
Pneumatic tool with safety yoke.
Do not use the tool on a ladder.
Compatible fastener angles.
Maximum number of fasteners in
magazine.
Fastener width.
Fastener length.
Max. operating pressure.
Tool weight.
Package contents
The package contains:
1 Stapler
1 Sequential action trigger
1 Safety glasses
1 Allen key 3 mm
1 Allen key 4 mm
1 Instruction manual
1 Exploded drawing
Check for damage to the tool, parts or accessories
which may have occurred during transport.
Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your stapler D51430/D51431 has been designed for
driving fasteners into wooden workpieces.
1 Trigger
2 Lock-off switch
3 Depth adjustment slider
4 Contact trip
5 Magazine
6 Magazine latch
7 Air fitting
Assembly and adjustment
Trigger selection (fig. B)
These tools are assembled with a bump action
trigger. A sequential action trigger is also included
with the original packaging. For definitions of
„bump action“ and „sequential action“, see below.
- The grey trigger with a single fastener printed on
the side is the sequential action trigger.
Installation of this kit causes the tool to function
in sequential action mode.
- The black trigger with three fasteners printed on the
side is the bump action trigger. Installation of this kit
causes the tool to function in bump action mode.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeWalt D51430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeWalt D51430 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info