798207
9
Zoom out
Zoom in
Previous page
1/20
Next page
9
2 Placing and installation of sensors
Installation in asphalt:
The temperature around the sensor part and sensor tube must not exceed 80°C.
A wooden dummy or similar must replace the sensor while asphalt is poured and cooled down.
The conduit must be a metal tube that can withstand the high temperatures.
e) Ensure that the sensor tube is closed with the supplied cap before the
concrete is poured or the bricks are laid. Make sure that air gaps are filled
with cement.
f) Coil approx. 0.5 m of the sensor cable
inside the tube. If the sensor cable needs
extension, see section 2.1.4.
g) Place the sensor part inside the sensor
tube until it is horizontally flush with the
edge of the sensor tube and rests on the
collar inside the tube.
h) The sensor part may be inspected using the two holes around the edge of the sensor tube.
The grooves on the outside of the sensor part correspond with the holes in the sensor tube.
illustration 6.1.1.3
installation pipe with sensor cable
Not OK! OK!
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Devi DEVIreg 850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Devi DEVIreg 850 in the language / languages: English as an attachment in your email.

The manual is 0.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Devi DEVIreg 850

Devi DEVIreg 850 User Manual - English - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info