499042
35
Zoom out
Zoom in
Previous page
1/37
Next page
THE DVD PLAYER SETUP MENU
3235
CHANGE PASSWORD
PARENTAL
Default setting:
Select this option when making changes or creating a new
password. Ensure that PASSWORD MODE is set to On. Select
and you will be prompted to enter the current valid
password (use the factory password 1379), then to enter and also
to confirm your New Password (the factory password cannot be
deleted or changed). The user password and the factory
password can now both be used. You can change the user
password at any time after entering a valid password. The user
password is useful for allowing others - for example a babysitter
- temporary access to Parental Control settings.
Default setting:
The Parental Lock allows you to limit the use of your DVD
Player to only those DVD discs that do not exceed the rating
you specify. When the Parental Control is set, DVD discs that
support this feature will play only after the password has been
entered. However, typically only discs produced by major
entertainment companies support Parental Control. You can
choose from eight levels of Parental Control, corresponding to
the standard rating system in the USA. You will need to enter a
valid password before making changes to Parental Control
settings. The factory password - 1379 - will always be a valid
password. You can also use a New Password which you can
create. Please refer to the Password section for further
instructions.
N/A
Change
Off
!
Remember to keep in mind that the key to the Parental
Control feature is the factory default password of 1379.
Consequently, your player may not be secure if this manual is
accessible by your children.
Note on parental security
The GENERAL SETUP PAGE
Angle Mark
Captions
Screen Saver
Memory
On
Off
Off
On
General Setup Page
....
Go to General Setup Page
PBC
Version
Default
Off
ANGLE MARK
Default setting:
Requires disc to support the multi-angle feature, the Angle
Mark continuously displays the current angle you’re viewing
on screen. Setting ANGLE MARK to will cancel
continuous display, and the current angle will be displayed on-
screen for just a few seconds after an angle change.
On
Off
CAPTIONS
SCREEN SAVER
PBC
MEMORY
VERSION
DEFAULT
Default setting:
Setting CAPTIONS to will display captions when Close
Caption supporting discs are used. If you don’t wish to
automatically enable captions, set this option to .
Default setting:
Protect your portable player’s LCD or TV’s cathode-ray tube
from “screen burn” that could result from a static image being
displayed for a prolonged period. The Screen Saver will
automatically start within a few minutes of video inactivity. To
enable this function, set this option to .
Default setting:
Video CD’s with PBC ( Playback Control ) contain menus on
the disc which enable easy access to the contents of the disc.
Select if you wish to disable this feature.
Default setting:
Allows you to restart a DVD movie from the last place played
at a future time provided the DVD player continues to be in
Stand-By mode. If you desire this feature to be enabled, set
this option to
Displays information about the unit’s Firmware and Hardware
versions. This information may be asked for by Tech Support
for trouble-shooting purposes.
If you would like to return all settings of your DVD Player’s
Setup to the factory defaults, choose .
This will reset all values for General, Audio, Video and
Language settings, with the exception of the Parental Control
and Password. After all, the Parental Control and Password
features would be of little use if your kids could simply clear
Off
On
Off
Off
On
On
Off
Off
On.
DEFAULT - RESET
The EXIT SETUP PAGE
Video Setup Page
....
Video Setup Page
....
Exit Setup Menu
Press "Enter" on the remote control to exit the Setup Menu.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver MT-703 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver MT-703 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info