499042
33
Zoom out
Zoom in
Previous page
1/37
Next page
THE DVD PLAYER SETUP MENU
33
SHARPNESS
BRIGHTNESS
CONTRAST
GAMMA
HUE
SATURATION
LUMA DELAY
Default setting:
Sharpness controls the fine details of an image
Default setting:
Brightness is the intensity of light emitted, select the level
desired.
Default setting:
Contrast is the difference from the highest white level to the
highest black level, select the desired level.
Default setting:
This setting will affect the middle range gray tones without
dramatically affecting the shadows and highlights for the DVD
player.
Default setting:
Hue is a specific color wavelength, for example - flesh tones,
select your desired level.
Default setting:
Select the saturation - the intensity of color in a video picture -
setting for the DVD player.
Default setting:
Select or for the Luma delay setting. Luma, or
luminance, is the overall brightness.
Mid
00
00
None
00
00
0T
1T 0T
VIDEO QUALITY SETUP
The AUDIO SETUP PAGE
SPEAKER SETUP
Default setting:
will allow you to personalize
your own audio setup.
Default setting:
Select or or stay with the default setting of . This
setting controls the difference between the maximum and
minimum acceptable signal level.
STR
LT/RT STR.
Virt Surround
OFF
Off
Auto ON, Off
Since most DVD discs feature Dolby 5.1 channel soundtracks,
you'll need to use the options: and The STR
setting should be used for most Televisions and Stereo
equipment. Generally, the LT/RT option should be used only
with Dolby Pro Logic receivers capable of decoding this type of
signal. The setting should be used with any two
speaker systems . Selecting
Post DRC
SPEAKER SETUP
SPDIF OUTPUT
CD
Default setting:
SPDIF (Sony/Philips Digital InterFace) refers to the digital
audio format used by most consumer electronics equipment. If
you are using the Stereo Audio Outputs, leave SPDIF set to
. If you wish to use the Digital Outputs, change this
setting to . The setting is used with receivers capable of
Dolby Digital 5.1 or DTS 5.1 channel decoding, while the
setting is reserved for two channel equipment.
Default setting:
SPDIF ( Sony / Phillips Digital InterFace ) refers to the digital
audio format used by most consumer electronics equipment. If
you are using the Stereo Audio Output, leave this setting at
. Generally, the setting is used with receivers
capable of Dolby Digital 5.1 or DTS 5.1 channel decoding,
while the setting is reserved for two channel equipment.
Select if you are using stereo audio outputs.
Default setting:
SPDIF ( Sony / Phillips Digital InterFace ) refers to the digital
audio format used by most consumer electronics equipment. If
you are using the Stereo Audio Output, change this setting to
. Generally, the setting is used with receivers
capable of Dolby Digital 5.1 or DTS 5.1 channel decoding,
while the setting is reserved for two channel equipment.
Select if you are using stereo audio outputs.
SPDIF On
OFF
On On
Off
SPDIF PCM
PCM RAW
PCM
Off
DOLBY DIGITAL
RAW
PCM RAW
PCM
Off
SPDIF SETUP
.
SPDIF Output
CD
.
Dolby Digital
DTS
MPEG
..
Set the SPDIF output
SPDIF Setup Page
....
On SPDIF Off
SPDIF On
PCM Channel
LPCM Out 48K
PCM
RAW
RAW
PCM
L/R
Video Setup Page
....
Sharpness
Brightness
Contrast
Set the picture sharpness
Video Quality Setup
....
Mid High
Medium
Low
00
00
Gamma
Hue
Saturation
Luma Delay
None
00
00
1T
.
Speaker Setup
SPDIF Setup
Dual Mono
Dynamic
.
Sound Setup
..
Go to speaker setup page
Audio Setup PageAudio Setup Page
....
HDCD
STR
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denver MT-703 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denver MT-703 in the language / languages: English as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info