498669
11
Zoom out
Zoom in
Previous page
1/98
Next page
ENGLISH
Simple
Version
Remote
Control
Playback
(Advanced)
Connections
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Set Up Speakers (Audyssey™ Auto Setup)
STEP 1
Preparation
STEP 2
Speaker Detection
STEP 3
Measurement
2
Set Up
the Subwoofer
If using a subwoofer capable of the
following adjustments, set up the
subwoofer as shown below.
When using a subwoofer with a direct
mode
Set the direct mode to “On” and disable the
volume adjustment and crossover frequency
setting.
When using a subwoofer without a
direct mode
Make the following settings:
Volume : “12 o’clock position”
Crossover frequency :
“Maximum/Highest Frequency”
Low pass filter : “Off”
Standby mode : “Off”
n
n
3
Connect the setup microphone to the
SETUP MIC jack of this unit.
FIRST SETUP 2/2
1 2 3 4 5 6
Speaker Assign
RETURN
Auto Setup Start
STEP1 Preparation
In a typical setup, select "Auto Setup Start". When connecting
speakers in a setup other than 2ch/2.1ch/5.1ch, select
"Speaker Assign".
Start Auto Setup
Enter Cancel
When the setup microphone is connected,
the following screen is displayed.
FIRST SETUP 2/2
RETURN
STEP1 Preparation
Please connect the include calibrated setup microphone
It prepares for beginning an auto setup.
Enter Cancel
When setting up speakers other than 5.1-channel
speakers, select “Speaker Assign”. When
the “Speaker Assign” setup screen appears,
perform the operations in Step 2 and 3 of “Set Up
Speakers” (vpage 38).
4
Select “Auto Setup Start” and then
press ENTER.
5
Select “Measure” and then press
ENTER.
When measuring begins, a test tone is output
from each speaker.
When measuring ends, the speaker detection
results are displayed.
FIRST SETUP 2/2
1 2 3 4 5 6
RETURN
Measure
STEP2 Speaker Detection
Please place the microphone at ear
height at main listening position.
Start measurement. Output large test tone during measuring
Enter Cancel
6
Select “Next → Measurement” and
then press ENTER.
7
Move the setup microphone to
position 2, select “Measure”, and
then press ENTER.
The measurement of the second position
starts. Measurements can be made in up to
six positions.
FIRST SETUP 2/2
1 2 3 4 5 6
RETURN
Next Calculation
Measure
STEP3 Measurement
Please place the microphone at ear
height at 2nd listening position (up to 6 position).
Start measurment. Output large test tone during measuring
Enter Cancel
8
Repeat step 7, measuring positions 3
to 6.
When measurement of position 6 is
completed, a “Measurements finished.”
message is displayed.
FIRST SETUP 2/2
1 2 3 4 5 6
Measure
RETURN
Next Calculation
Retry
STEP3 Measurement
Please place the microphone at ear
height at 3rd listening position (up to 6 position).
Start measurment. Output large test tone during measuring
Enter Cancel
If you want to omit measurements from the next
point onward, select “Next Calculation”.
(Go to vpage 8
STEP4 Calculation
)
If “Cancel” is Selected
“Cancel setup?” is displayed on the GUI screen.
If “Yes” is selected, “FIRST SETUP” closes.
Setting up the speakers again
Repeat the operation from step 3 of
STEP1 Preparation
.
The title of the GUI screen will change from
“FIRST SETUP” to “AUDYSSEY AUTO SETUP”
at this point, but the operation method is the
same.
n
NOTE
If “Caution!” is displayed:
Go to “Error Messages” (vpage 9), check
any related items, and perform the necessary
procedures.
If the problem is resolved, return and restart
“Audyssey Auto Setup”.
When Performing Audyssey
Auto Setup Over Again
Press ui to select “Retry”, and then press
ENTER.
When Measuring has Stopped
Press RETURN, and the “Cancel setup?”
prompt is displayed.
Press o p and select “Yes”, then press
ENTER.
n
n
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon S-5BD - Cara at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon S-5BD - Cara in the language / languages: English as an attachment in your email.

The manual is 17,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon S-5BD - Cara

Denon S-5BD - Cara User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info