An error message is displayed if Audyssey™ Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens,
check the relevant items, be sure to take the necessary measures, then perform Audyssey Auto Setup over again.
NOTE
Be sure to turn off the power before checking speaker connections.
ExamplesError detailsMeasures
Caution!
No microphone or speaker
The connected setup microphone is broken, or a
device other than the supplied setup microphone
is connected.
Not all speakers could be detected.
The front L speaker was not properly detected.
•
•
•
Connect the included setup microphone to the
SETUP MIC jack of this unit.
Check the speaker connections.
•
•
Caution!
Ambinet noise is too high
or Level is too low
There is too much noise in the room for accurate
measurements to be made.
Speaker or subwoofer sound is too low for accurate
measurements to be made.
•
•
Either turn off any device generating noise or move
it away.
Perform again when the surroundings are quieter.
Check the speaker installation and the direction in
which the speakers are facing.
Adjust the subwoofer’s volume.
•
•
•
•
Caution!
Front R None
The displayed speaker could not be detected.•Check the connections of the displayed speaker.•
Caution!
Front L Phase
The displayed is connected with the polarities
reversed.
•Check the polarities of the displayed speaker.
For some speakers, this error message may be
displayed even if the speaker is properly connected.
If you are sure the connection is correct, press ui
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Denon S-5BD - Cara at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Denon S-5BD - Cara in the language / languages: English as an attachment in your email.
The manual is 17,49 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
