614631
20
Zoom out
Zoom in
Previous page
1/28
Next page
13
Fader curve adjustment
Adjusts the startup response of the channel fader/cross fader.
n Adjust the channel fader curve
Intermediate curve
characteristics.
Slow startup curve
characteristics.
Fast startup curve
characteristics.
CH1 and CH2 have the same curve characteristics.
n Adjust the cross fader curve
Sharp startup
characteristics, with cut-
in/cut-out.
Slow startup curve
characteristics.
(16 levels)
Set the cut position of the
cross fader.
(11 levels: CP1-CP11)
Set the cross fader to
”THRU”.
Adjusting the cross fader torque
1
Remove the rubber cap on the front panel.
Rubber cap
2
Move the cross fader to the far right edge so that the
screwdriver will line up with the screw head inside.
Small (+) srcewdriver
3
Using a Phillips screwdriver, adjust the sliding
torque.
Rotate to the right:Increases the sliding torque so that the
cross fader resistance is increased.
Rotate to the left:Decreases the sliding torque so that the
cross fader resistance is decreased.
4
After completing the adjustment, replace the rubber
cap on the front panel.
NOTE
The cross fader is constructed of precision parts. Over tightening or
over loosening the cross fader may affect the performance of the
cross fader, or may damage it.
Computer OS settings
Before connecting a computer to this unit, set the OS of the computer
that you want to connect with this unit.
The default setting is ”PC”.
Settings cannot be changed when the computer is connected.
1
While pressing EFX CUE, press BEAT o, p.
The mode changes to OS setting mode.
2
Press BEAT o, p to select the OS.
(Windows OS) (Mac OS)
3
Press TAP.
The OS setting is entered.
To cancel the settings, press SEND/RETURN.
MASTER
TAP
SEND/RETURN
EFX CUE
EFX INS POWER
BEATo,p
USB settings
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X600 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DN-X600

Denon DN-X600 User Manual - German - 28 pages

Denon DN-X600 User Manual - Dutch - 28 pages

Denon DN-X600 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info