614631
18
Zoom out
Zoom in
Previous page
1/28
Next page
11
EFX SENDEFX INS BEATo,p
TAP
EFX ON/OFF
EFX INS
EFX SELECT
EFX CUE
EFX DRY/WET
EFX FREQ.
Operating the effector
1
Press EFX SEND for the channel that you want to
apply the effector to.
The input source sound signal is sent to the effector.
To apply the effector to the mic input or master output, press
EFX INS.
2
Set the BPM.
BPM is the base value for the effector. To obtain normal
effects, match the BPM value with the BPM of the track.
The following three setting methods are available for the BPM
value.
n Setting Auto BPM
q Press TAP for more than 1 second.
”Auto” is shown in the display.
TAP LED lights up green.
w
Press TAP (short push).
The measured auto BPM value is displayed, and that value
is locked.
TAP LED switches off.
n Setting Manual In BPM
q Press TAP for more than 2 seconds.
The BPM value in the display flashes.
w Press BEAT to set the desired BPM value.
e Press TAP.
The setting is complete.
n Setting Manual TAP BPM
q Repeatedly press TAP in time with the input source rhythm.
The BPM value for the interval between button presses
is set.
3
Select the effector using EFX SELECT .
4
Press EFX ON/OFF to switch the effect ON.
EFX ON/OFF lights up.
Press EFX ON/OFF again to turn the effect off.
n Adjusting the effects
Rotate EFX FREQ.
Adjust the filter cut off frequency, and adjust the frequency band
within which to apply the effect.
This does not operate during SEND/RTN.
n To monitor the effect sound
Press EFX CUE.
Off
On
When this is switched on, the effect volume can be monitored even
when the effect is off. (Excluding ECHO and REVERB. )
n To adjust the proportion of
original volume and effect volume
Rotate EFX DRY WET.
When rotated in the DRY direction, the original volume proportion
increases.
When rotated in the WET direction, the effect volume proportion
increases.
Beat setting
Adjust the beats based on the set BPM value.
The setting range for beats differs depending on the effector.
Press BEAT to select the set beat value.
The beat display switches.
GSelectable rangeH
When REVERB/FLANGER/B·BREAKER/FILTER/B·SCRATCH are
selected:
1/4 - 32
When ECHO/DELAY/LOOP are selected:
1/16 - 4
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X600 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DN-X600

Denon DN-X600 User Manual - German - 28 pages

Denon DN-X600 User Manual - Dutch - 28 pages

Denon DN-X600 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info