614631
21
Zoom out
Zoom in
Previous page
1/28
Next page
14
Before use
Part names and
functions
Connections
Basic
operations
Effector
Function
USB settings
Troubleshooting
IndeX
specifications
System diagram
Fader
Start function
USB device mode
The USB device mode (USB B terminal) supports the following
functions.
USB audio interface function
USB MIDI interface function
Using this function, music files stored on the computer can be played
back through this unit, and sounds played through this unit can be
saved to the computer.
USB audio input/output
This unit is equipped with a maximum 8ch (stereo 4 system), 24bit,
96kHz USB audio input/output sound card function. The sampling
frequency can be selected from 44.1k, 48k, and 96kHz.
The default setting is 96kHz. If your software does not support
96kHz sampling, use the procedure below to switch the sampling
frequency.
Selecting the sampling frequency
1
When the power is OFF, press POWER while holding
down EFX INS.
The power switches on, and the mode switches to sampling
frequency mode.
2
Press BEAT o or p to display the sampling
frequency that you want to set.
44.1kHz 48kHz 96kHz
3
Press TAP.
The displayed sampling frequency is selected and saved.
4
Press POWER to turn the power off, and then press
POWER again to turn the power on again.
When this unit restarts, the sampling frequency setting is set.
NOTE
For Windows PC users:
If ASIO driver version 1.01 is already installed for other Denon DJ
product, uninstall it first, and then install the 2.1x version found on
the included CD-ROM or our website. You should do this before
connecting the DN-X600 to your computer.
Set the computer OS to match the computer you are using
((vpage13) ”Computer OS Settings”).
USB audio output
The following signals are always outputted from the 4-system stereo
USB audio output. Select the desired signals through your software
application on your computer.
USB 1/2
CH1 or DVS CH1
USB 3/4
CH2 or DVS CH2
USB 5/6
MIC or USB EFX SEND
USB 7/8
REC
USB audio input mode settings
For the USB audio signal input mode, there are 2 different methods
of mixing processes, channel, “CH” and master, “MAS”. Set them
accordingly as listed below.
The default mode is ”CH INPUT mode”.
1
While pressing MASTER, press BEAT o, p.
The mode changes to USB audio setting mode.
2
Press BEAT o,p to select the USB audio mode.
CH INPUT mode MASTER mode
CH INPUT mode
Mixes the sources input from the channels.
Set this mode if you do not want to use the mixer function
supplied in the DJ software.
USB channel 1 and 2 inputs Input channel 1
USB channel 3 and 4 inputs Input channel 2
USB channel 5 and 6 inputs USB EFX RTN
USB channel 7 and 8 inputs Master bus
MASTER mode
DJ software mixer output is mixed in the DN-X600 internal bus.
Mixing is performed with both the DJ software mixer function
and the DN-X600.
Assign each USB audio input signal to the following busses.
USB channel 1 and 2 inputs Master bus
USB channel 3 and 4 inputs Cue monitor bus
USB channel 5 and 6 inputs USB EFX RTN
USB channel 7 and 8 inputs Master bus
3
Press TAP.
The USB audio mode setting is entered and saved.
To cancel the settings, press SEND/RETURN.
4
Set the DJ software audio output settings to match
the USB audio input mode settings.
For details on how to configure the settings, see the
instruction manual for the DJ software.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-X600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-X600 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Denon DN-X600

Denon DN-X600 User Manual - German - 28 pages

Denon DN-X600 User Manual - Dutch - 28 pages

Denon DN-X600 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info