614645
22
Zoom out
Zoom in
Previous page
1/49
Next page
20
ENGLISH
Alpha-Track Hot Start mode
Like with buttons A1 and A2, operation is performed
using the (RVS)/FLIP/(CLR), A3, A4 and EXIT/RELOOP
buttons. (Refer to page 16.)
Hot start mode
Like with buttons A1 and A2, operation is performed
using the (RVS)/FLIP/(CLR), A3, A4 and EXIT/RELOOP
buttons. Operation is same as Hot Start with A1, A2
buttons. See page 16 for details.
6
Exit and Reloop
u The EXIT/RELOOP button
can be used same as
Seamless Loop function.
7
Reverse Play
i You can play Sampler sound in
reverse with push RVS (FLIP)
button. In reverse play mode
RVS LED lights up.
Reverse playback will start with next
playback starting after reverse mode
turned on.
9
Setting the Sampler volume and pitch
The sound level (volume) and pitch can be
set individually for Sampler1 and 2.
See m - step 8 Adjust sound level and
pitch.
10
Clearing the Sampler data
!0 While pressing the (RVS)/FLIP/(CLR)
button, push the SAMP button (SAMP1 or
SAMP2) to clear the Sampler.
By pushing the (RVS)/FLIP/(CLR) button
for approx. 1 sec, you can clear both
Samplers 1 and 2.
8
Moving Sampler B point
o When the B button is
pushed during Sampler
playback, the B point moves
to the point at which the
button was pushed, and loop
playback from point A starts.
y, ui, !0 w, oq, r, !0
e, t
1
Record in Sampler
q When the SAMP button
(SAMP1 (A3) or SAMP2 (A4))
is pushed in the standby or
playing, the sound from A3
or A4 point is recorded to
Sampler memory up to 15
seconds.
The SAMP1 or SAMP2 button is flashing
while recording. When the recording is
completed, the button turns off and the
corresponding SAMP B LED lights up.
4
Play Sampler sound
r Playback of the Sampler
sound starts when the
SAMP button is pushed after
recording has stopped.
Sampler playback continues in looping.
With setting B point, playback loop
between A and B point. Without B point
setting Sampler loops whole recorded
length (about 15 seconds).
NOTE: It is not possible to play Sampler1
and Sampler2 at the same time.
t To stop the Sampler
sound push STOP (a CUE)
button.
Sampler
Stop recording
e To stop recording before
recording finish
automatically with
memory full, push the
STOP (a CUE) button.
The EXIT/RELOOP LED light to indicates
Sampler Loop mode is set automatically.
3
SAMP. STOP
DN-S5000 has two Samplers of 15 seconds length. These Samplers are also used in looping playback.
2
Setting B point
w When the B button is
pushed during Sampler
recording, the Sampler Loop
B point is set and the loop
mode turns on.
Recording continues for approximately
15 seconds without stopping after set B
point.
If the B point is not set, recording end
point set as B point automatically. Also
EXIT/RELOOP LED light to indicates
Sampler Loop mode is set automatically.
Select Sampler Loop mode
You can select loop mode for Sampler when
Sampler playback stop.
Loop (default):
Sampler playback continues with
looping.
(EXIT/RELOOP LED stays lit)
Exit: Sampler playback continues over B
point up to recording length.
(EXIT/RELOOP LED flashes)
Single: Sampler playback stops at B point.
(EXIT/RELOOP LED turned off)
y To select loop mode, push
EXIT/RELOOP button after
recording and before playing.
5
SAMP. STOP
22


Need help? Post your question in this forum.

Forumrules
1

Forum

denon-dn-s5000

Reset search

  • Awe. Guys anyone know how to update firmware of DNS -5000 ? Submitted on 30-8-2023 at 07:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-S5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-S5000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info