614645
20
Zoom out
Zoom in
Previous page
1/49
Next page
18
ENGLISH
6
Trim B point
u Turn Scratch Disc to move
the B point 1 frame at a
time.
Range for trimming B point is limited as
follows.
B point for Loop:
Between 5 frames after A point and
disc end.
B point for Splice:
±30 frames from the original B point.
(However, when the B point was loaded
from the standby mode, the B point
cannot be moved backwards. So, use
A/B Move function)
B point for Sampler:
Between 5 frames after A point and
Sampler end.
A/B move
8
Select A and B points
o Select or the A/B Move and
push the A button for the A
point you want to move. The
standby mode is set at the A
point and the A button
illumination flashes.
!0 To select the B point, push
the B button after selecting
the A point.
The B LED flashes. The Selected B point
is used for the A1 or A2 point that was
first selected.
11
Cancel the A-B Trim or A/B Move
!3 Push the A/B TRIM button
to cancel the mode.
10
A/B TRIM
q, !3r, u, !1
e, t,
o, !2
y, i,
!0, !2
w
1
Select A-B trim mode
First select whether to adjust the A and B
points using the A-B trim mode or the A/B
move mode.
q Push the A/B TRIM button
to set the A and B point
position adjustment mode.
w Now turn the
PARAMETERS knob to
select the A-B Trim or
the A/B Move.
3
Trim A point
r Turn the Scratch Disc to
move the A point 1 frame at
a time.
Range for trimming A point is limited as
follows.
A point for Loop:
±30 frames from the original A point.
(However, when the A point was
loaded from the standby mode, the A
point cannot be moved backwards.
So, use A/B Move function)
A point for Splice:
Between the beginning of the disc and
5 frames before B point.
A point for Sampler:
Between the original A point and 5
frames before B point.
2
Select A point (in A-B Trim)
e Select the A-B Trim and push
the corresponding A button
for the loop to be trimmed.
The A button illumination
flashes and loop playback
starts.
In the splice trim mode, total 6 seconds
of spliced section (started from 2
seconds before A point to 4 seconds
after the B point) is played.
5
Select B point (in A-B Trim)
y Select the A-B Trim mode
and to select the B point,
push the B button after
selecting the A point.
Then push the B button. The B LED flashes
and the B point trim become enable.
The Seamless Loop, Sampler loop and splice A and B points can be fine-adjusted using Scratch Disc.
There are two ways for doing this.
A-B Trim: Trim the points during loop playback as a rehearsal.
A/B Move: Move the points using the fast search or manual search. A/B Move can not be used with
Sampler loop.
PARAMETERS
ON / OFF
PUSH
A/B Trim
4
Save the A point
t Push the A button again to
save new A point, and the
unit automatically exit from
the A-B Trim mode.
7
Save the B point
i Push the B button again to
save new B point, and the
unit automatically exit from
finish the A-B Trim mode.
9
Move A or B points
!1 Turn the Scratch Disc to
move the selected point
using the manual search
function.
Range for moving A point is limited as
follows.
A point for Loop:
Between the beginning of the disc and
5 frames before B point.
A point for Splice:
Between the beginning of the disc and
5 frames before B point
Range for moving B point is limited as
follows.
B point for Loop:
Between 5 frames after A point and
disc end
B point for Splice:
Between 5 frames after A point and
disc end
10
Save the A or B points
!2 Push the A1/A2 or B button
again. The LED stops
flashing and the A1/A2 or B
point is saved, and the unit
automatically exit from the
A/B Move mode.
A / B TRIM
SPLICE
A / B TRIM
SPLICE
20


Need help? Post your question in this forum.

Forumrules
1

Forum

denon-dn-s5000

Reset search

  • Awe. Guys anyone know how to update firmware of DNS -5000 ? Submitted on 30-8-2023 at 07:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-S5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-S5000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info