614645
23
Zoom out
Zoom in
Previous page
1/49
Next page
21
ENGLISH
12
PLATTER EFFECT
1
Select the Platter Effect Source
q When the SOURCE button is pressed and
held in for more than 1 second, the source
for which the Platter effect function is to be
used can be selected with the
PARAMETERS knob.
MAIN:
The Platter effect function only affects the
Main Track.
aa
TRACK:
The Platter effect function only affects the
Alpha-Track.
MAIN/
aa
T:
The Platter effect function affects both the
Main and Alpha-Track.
NOTE: The echo function cannot be used for
the Main and Alpha-Tracks
simultaneously.
2-1
DRAG-S (DRAG START):
Simulates the dragging sound of a belt drive
turntable starting up from a stop mode.
w The DRAG-S function can
be turned on and off by
pressing the DRAG-S
button.
DUMP /
RVS
SOURCE
This function is available for the Main Track and Alpha-Track.
3-2
4-1
DUMP/RVS
!3 The mode switches in the
following order each time
the DUMP/RVS button is
pressed: DUMP RVS
off.
DUMP /
RVS
SOURCE
BRAKE TIME, ECHO TIME
When the BRAKE or ECHO turn on, the
PARAMETERS LED flashes and the BRAKE or
ECHO parameter are displayed.
If you use these 2 functions with default
settings, there is a 4 second time out of
inactivity for the BRAKE/ECHO button once
selected and PARAMETERS knob if adjusted.
After 4 seconds, and exits out of the BRAKE or
ECHO menu.
BRAKE TIME:
y Or when the TIME
(BRAKE/ECHO) button is
pressed and held in for
more than 1 second while
BRAKE is selected, the
BRAKE time selection
mode is set.
u The BRAKE time can
be selected with the
PARAMETERS knob.
When the PARAMETERS knob is
pressed, the time is entered and the
BRAKE time selection mode is
cancelled.
2 The BRAKE is activated when the
13
button is pushed during playback.
2-2
DRAG-S TIME:
When the DRAG-S turn on, the PARAMETERS
LED flashes and parameter are displayed.
If you use with default settings, there is a 4
second time out of inactivity for the DRAG-S
button once selected and PARAMETERS knob
if adjusted. After 4 seconds, and exits out of
the DRAG-S menu.
e Or when the TIME
(DRAG-S) button is
pressed and held in for
more than 1 second, the
DRAG-S time selection
mode is set.
3-1
BRAKE/ECHO
BRAKE:
Simulates a winding-down sound of a vinyl
turntable coming to a full stop slowly.
ECHO (TAIL ECHO):
Adds a echo sound when playback stops.
t The mode switches in the
following order each time
the DRAG-S button is
pressed: BRAKE ECHO
off.
4-3
RVS (REVERSE):
5 Each pushing the
13 button switches
between reverse playback and normal
playback.
The reverse play turns off when the Hot
Start or stutter is started.
4-2
DUMP:
Reverse playback is performed for the
specified time. Plays the sound backwards
while continuing in a forward motion without
losing elapsed time when you return back to
normal (forward) play.
4 Each pushing the
13 button switches
between DUMP playback and normal
playback.
The reverse play turns off when the Hot
Start or stutter is started.
5
PLATTER MODE MEMO
The DRAG-S on/off setting and time data, the
BRAKE/ECHO on/off setting and time data and
the source for which the Platter effect function
is to be used can be stored in the preset mode.
After making the desired settings, enter the
preset mode and stores the settings at
PRESET (5).
Once the settings are stored, they are
automatically set each time the power is
turned on. (See PRESET on page 23.)
DRAG-S
TIME
DRAG-S
TIME
PARAMETERS
ON / OFF
PUSH
DRAG-S
TIME
BRAKE /
ECHO
TIME
PARAMETERS
ON / OFF
PUSH
w, e q, !3 t, y,
i, !0
q
r
u
o
!0
!1
!2
1
2
3
4
5
r The DRAG-S time can
be selected with the
PARAMETERS knob.
When the PARAMETERS knob is
pressed, the time is entered and the
DRAG-S time selection mode is
cancelled.
1 The DRAG-S is activated when playback is
started with the
13 button.
2-2
PARAMETERS
ON / OFF
PUSH
3-2
ECHO TIME:
i Or when the TIME (BRAKE/ECHO) button
is pressed and held in for more than 1
second while ECHO is selected, the mode
for selecting the number of echo feedback
times is set.
o The time of ECHO can be selected with
the PARAMETERS knob.
!0 When the TIME (BRAKE/ECHO) button is
pressed again (short press), the echo delay
time can be selected with the
PARAMETERS knob.
!1 The delay time of ECHO can be selected
with the PARAMETERS knob.
!2 When the PARAMETERS knob is pressed,
the data is entered and the echo time
setting mode is cancelled.
3 The ECHO is activated when the
13
button is pushed during playback.
23


Need help? Post your question in this forum.

Forumrules
1

Forum

denon-dn-s5000

Reset search

  • Awe. Guys anyone know how to update firmware of DNS -5000 ? Submitted on 30-8-2023 at 07:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon DN-S5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon DN-S5000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info