498717
22
Zoom out
Zoom in
Previous page
1/96
Next page
22
1
Simulcast playback
Use this switch to monitor a video
source other than the audio source.
Press the VIDEO SELECT button
repeatedly until the desired source
appears on the display.
Cancelling simulcast playback.
Select SOURCE using the VIDEO
SELECT button.
Switch the program source to the
component connected to the video input
jacks.
[4]
Combining the currently playing sound with the desired image
[5] Checking the currently playing program source, etc.
1
On screen display
Each time an operation is
performed, a description of
that operation appears on the
display connected to the units
VIDEO MONITOR OUT jack.
Also, the units operating status can be
checked during playback by pressing the
remote control units ON SCREEN/DISPLAY
button.
Such information as the position of the input
selector and the surround parameter settings
is output in sequence.
(Remote
control unit)
1
Display
(Remote
control unit)
1
3
ENGLISH
BRIGHT MEDIUM
OFF
DIM
3
Using the dimmer function
Use this to change the
brightness of the display.
The display brightness changes
in four steps (bright, medium,
dim and off) by pressing the
main units DIMMER button
repeatedly.
(Remote
control unit)
2
Status
Also, the units operating
status can be checked during
playback by pressing the main
units STATUS button.
Such information as the position of the input
selector and the surround parameter settings
is output in sequence.
STATUS
(Main unit)
IN=V SOURCE
2
13
SURROUND
Before playing with the surround function
Before playing with the surround function, be sure to use the test tones to adjust the playback level from the
different speakers. This adjustment can be performed with the system setup (see page 11) or from the remote
control unit, as described below.
Adjusting with the remote control unit using the test tones is only possible in the Auto mode and only
effective in the DOLBY/DTS SURROUND modes. The adjusted levels for the different modes are automatically
stored in the memory.
1
2
Press the TEST TONE button.
Test tones are output from
the different speakers. Use
the channel volume adjust
buttons to adjust so that
the volume of the test
tones is the same for all
the speakers.
4
After completing the
adjustment, press the
TEST TONE button again.
1
Set the DOLBY/DTS SURROUND (Dolby Pro
Logic
II or Dolby Digital or DTS) modes.
DOLBY/DTS
SURROUND
(Main unit) (Remote control unit)
2, 4
3
1
3
(Remote control unit)
(Remote control unit)
3
(Remote control unit)
NOTE:
Please make sure the AUDIO position of
the slide switch on the remote control unit.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-550SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-550SD in the language / languages: German as an attachment in your email.

The manual is 10,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info