498717
23
Zoom out
Zoom in
Previous page
1/96
Next page
23
After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as (described) below.
FL C FR SR SB
SWFADER SL
1
Select the speaker whose
level you want to adjust.
2
The channel switches as shown below each
time the button is pressed.
Adjust the level of the
selected speaker.
(Remote control unit)
NOTE:
Please make sure the AUDIO position of
the slide switch on the remote control unit.
If the channel levels are adjusted separately
after adjusting the fader, the fader adjustment
values are cleared, so adjust the fader again.
1
2
2
Default setting of channel level is 0 dB.
The level of the selected speaker can be
adjusted within the range of +12 to 12 dB
using the cursor buttons.
SW channel level can be turned off by
decreasing one step from 12 dB.
OFF ´ 12 dB ´ 12 dB
ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
2
2
1
6
1
2
5
4, 7
5
6
3
Playback with a digital input
1
Select the input source.
q Select an input source set to digital
(COAXIAL/OPTICAL) (see page 14).
Example: DVD
w Set the input mode to AUTO, PCM or
DTS.
FUNCTION / SELECT
(Main unit) (Remote control unit)
(Remote control unit)
2
Select the Dolby/DTS Surround mode.
DOLBY/DTS
SURROUND
(Main unit) (Remote control unit)
3
Play a program source with the , mark.
When performing this operation from the main
units panel, press the SURROUND MODE
button, then turn the SELECT knob and select
Dolby Pro Logic
II or DTS NEO:6.
SURROUND MODE
FUNCTION / SELECT
(Main unit) (Main unit)
(Remote control unit)
Light
Lights when the SURROUND BACK button is on.
(Remote control unit)
The DTS indicator lights when
playing DTS sources.
Light
The SIGNAL DETECT indicator lights
when playing 6.1-channel surround
sources containing the identification
signal.
The Dolby Digital indicator lights
when playing Dolby Digital sources.
Operate the SURROUND BACK button to switch
Surround Back CH ON/OFF.
When the SIGNAL DETECT indicator is lit, we
recommend turning the surround back channel
using the SURROUND BACK button on the remote
control unit during playback.
To use DTS 96/24 sources with the optimum
system, we recommend turning the surround back
channel off.
Light
Light
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Denon AVR-550SD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Denon AVR-550SD in the language / languages: German as an attachment in your email.

The manual is 10,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info