524165
8
Zoom out
Zoom in
Previous page
1/13
Next page
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-9000, GT-FSI-06-UK
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-9000, GT-FSI-06-UK
14 15
Note:
The programming remains set after the unit is removed from the
mains socket.
The programming also remains in the remote control even when
no batteries are inserted in the remote control.
Allocation of the channels to the
remote sockets
Directly to the remote socket
If you press the button the remote socket briefly, the plugged-in
electrical device will be switched on/off.
With the
button, you can allocate the remote socket to a
new channel at any time, see "Allocating the channels to the remote
sockets". If you press the
button for longer than 6 seconds,
until the LED display starts to flash, all of the codes will be deleted.
Using the remote control (GT-9000)
Switching on and off
To switch a electrical device on/off, press the relevant
/ button
of the channel (1, 2, 3 or 4, depending on the allocation).
With the
button, all channels are switched on. With the
button, all channels are switched off.
Note:
After a power failure, a malfunction of the memory for the system
code and the channel of the remote socket could take place in rare
cases. In this case, disconnect the remote socket from the mains for
at least 6 hours and then carry out the allocation procedure again.
Under certain circumstances (e.g. any type of high-frequency
interference), faults can occur in the radio transmission between
the receiver and the transmitter, during which it will not be possible
to switch the device on or off.
In this case, disconnect the device briefly from the power supply
and then plug it back in.
Operation
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Delta GT 9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Delta GT 9000 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info