524165
7
Zoom out
Zoom in
Previous page
1/13
Next page
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-9000, GT-FSI-06-UK
Helpline No. UK/Northern Ireland 0800 328 6020
Rep. Ireland 00800 4467 5888
E-mail Support info@dariolondon.com
Model Number: GT-9000, GT-FSI-06-UK
12 13
Installation of the remote sockets
Plug one of the remote sockets into the wall socket intended for
use, and then plug the desired electrical device (e.g. a lamp) into
the remote socket.
Switch your electrical device on and then press the
button on
the remote socket briefly.
If you press the
button briefly again, your electrical device will
switch off again.
If the remote socket is already removed from the socket after a
very short period of operation, the programming could be lost and
must be repeated. In normal operation, the programming can be
saved for approx. 1 hour after being disconnected from the mains.
In normal operation, the programming remains permanently when
separated from the mains.
Display on the remote socket
The control lamp illuminates when the remote socket is switched on.
The control lamp is off when the remote socket is switched on.
Preparatory measures
The remote control is equipped with four channels. You can allocate
a dedicated channel to each remote socket, or you can use one
channel for several remote sockets, in order to switch them on/off
at the same time.
In order to allocate a channel to a remote socket, press the
button on the respective remote socket and keep it pressed down
for approx. 2 seconds. Release the button and the LED display will
flash for approx. 10 seconds. During this time, you can press the
button
on the remote control for the channel that you intend to
allocate to this remote socket.
As soon as the channel is allocated, the electrical device on the
relevant remote socket will be switched on and the control lamp in
the remote socket will illuminate.
In order to check whether the allocation works, press the relevant
button
and for the allocated channel.
If the remote socket should not respond, repeat the allocation
process.
If the
button does not work, the memory is full.
Delete the existing code in the remote socket.
Press the
button for longer than 6 seconds, until the LED
display starts to flash.
All codes are now deleted.
Allocation of the channels to the
remote sockets
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Delta GT 9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Delta GT 9000 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info