Manual DeLonghi Maestosa - EPAM960.75.GLM (page 19 of 28) (English)

687067

Zoom out

Zoom in

1/28

Please note!

• If the descaling cycle is not completed correctly (e.g. no

electricity) we recommend repeating the cycle;

• After descaling, it is normal for the grounds container

(A18) to contain water.

• If the water tank has not been lled to the MAX level, at

the end of descaling, the appliance requests a third rinse to

guarantee that the descaler solution has been complete-

ly eliminated from the machine's internal circuits. Before

starting rinsing, remember to empty the drip tray.

19. SETTING WATER HARDNESS

The "DESCALING NEEDED. PRESS OK TO START (~45min)" mes-

sage is displayed after a period of time established according

to water hardness. The machine is set by default for a hardness

value of "4". The machine can also be programmed according to

the hardness of the mains water in the various regions so that

the machine needs to be descaled less often.

19.1 Measuring water hardness

1. Remove the "Total hardness test" indicator paper (C1) from

its pack (attached to the English instructions).

2. Immerse the paper completely in a glass of water for one

second.

3. Remove the paper from the water and shake lightly. After

about a minute, 1, 2, 3, or 4 red squares form, depending

on the hardness of the water. Each square corresponds to

one level.

19.2 Setting water hardness

1. On the display (B1), press the settings menu icon (B6);

2. Select "Water hardness";

3. "Set water hardness using test strip provided inside user

manual"carry out the procedure described in the previous

section and measure water hardness;

4. Press the dot corresponding to the water hardness meas-

ured previously as indicated in the following table:

Total Hardness Test (C1) Water hardness

Level 1

Level 2

Level 3

Level 4

5. The machine is now reprogrammed with the new water

hardness setting.

6. Press "←" to go back to the homepage.

20. WATER SOFTENER FILTER

Certain models are tted with a water softener lter (C6). If this

is not the case with your model, you are recommended to pur-

chase one from De’Longhi Customer Services.

To use the lter correctly, follow the instructions below.

20.1 Installing the lter

1. Press the settings menu (B6);

2. Select "Water lter";

3. "Press OK to install water lter": press OK to enter the guid-

ed procedure

4. "Turn date indicator to next 2 months" (g. 63);

Please note!

The lter lasts about two

months if the appliance is used

normally. If the coee maker is

left unused with the lter in-

stalled, it will last a maximum

of three weeks.

5. Press "Next" ("Back" to

go back to the previous

screen; "Cancel" to cancel

the operation);

6. "Run water into lter hole

until it comes out" (g.

61): to activate the lter,

run tap water through

the hole in the lter as

shown in the gure until

water comes out of the

openings at the side for

more than a minute. Press

"Next";

7. "Immerse lter in water

tank to expel air bubbles"

(g. 62): press the button

(A15), open the front door

(A16) (g. 3), extract the

water tank

(A25) (g. 4)

and ll with water; insert

the lter in the water tank

and immerse it complete-

ly for about ten seconds,

sloping it and pressing

it lightly to enable the

air bubbles to escape.

Insert the lter in the l-

ter housing (g. 63) and

press as far as it will go;

press "Next";

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Maestosa - EPAM960.75.GLM in the language / languages: English as an attachment in your email.

The manual is 6,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Maestosa - EPAM960.75.GLM

DeLonghi Maestosa - EPAM960.75.GLM User Manual - German - 38 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - Dutch - 31 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - French - 31 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - Italian - 30 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - Spanish - 30 pages

DeLonghi Maestosa - EPAM960.75.GLM Additional guide - All languages - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi Maestosa - EPAM960.75.GLM Manual

Product: