Manual DeLonghi Maestosa - EPAM960.75.GLM (page 20 of 28) (English)

687067

Zoom out

Zoom in

1/28

8. "Insert lter in housing and push down fully" (g. 63). Press

"Next";

9. "Insert water tank"

(g. 6): close the tank with the lid

(A24), then put the tank back in the machine and close the

front door. Press "Next";

10. "Position 0.5l container under spouts. Press OK to ll l-

ter": place an empty container with a minimum capacity

of 0.5 litres under the hot water/steam spout (F) (g. 8)

and press "OK".

11. "Rinsing underway. "Hot water from spouts": delivery be-

gins and stops automatically;

12. "Water lter installed": press "OK". The lter is now active

and you can use the coee machine.

20.2 Replacing the lter

Replace the lter (C6) when "REPLACE WATER SOFTENER FILTER,

PRESS OK TO START" appears on the display (B1). To replace the

lter immediately, press "OK" and follow the instructions from

point 6. To replace the lter later, press "Cancel". The symbol

(B9) appears on the display to remind you that the lter needs

replacing.

To replace, proceed as follows:

1. Remove the new lter from the packaging;

2. Press the settings menu (B6);

3. Select "Replace water lter";

4. "Press OK to replace water lter": press "OK" to enter the

guided procedure;

5. "Remove current lter before installing a new one": press

the (A15) button, open the front door (A16) (g. 3) and

extract the water tank (A25) and exhausted lter. Press

"Next" to continue ("Back" to go back to the previous

screen; "Cancel" to cancel the operation);

6. Follow the operations described in the previous section

from point (4).

Please note!

After two months (see date indicator) or when the appliance has

not been used for 3 weeks, you should replace the lter even if

the message has not yet been displayed.

20.3 Removing the lter

If you want to use the appliance without the lter (C6), you

must remove it and notify the appliance of its removal. Proceed

as follows:

1. Press the button

(A15), open the front door

(A16) (g. 3)

and extract the water tank

(A25) and exhausted lter;

2. Press the settings menu (B6);

3. Select "Remove water lter";

4. "Press OK to conrm lter removal": press OK to conrm;

5. "Filter removed": the change has been saved. Press "OK" to

go back to the homepage (B).

Please note!

After two months (see date indicator) or when the appliance has

not been used for 3 weeks, you should replace the lter even if

the message has not yet been displayed.

21. TECHNICAL DATA

Voltage: 220-240 V~ 50-60 Hz max. 10 A

Power: 1550 W

Pressure: 1.9 MPa (19 bars)

Water tank capacity: 2.1 l

Size LxDxH: 290x468x405mm

Cord length: 1750 mm

Weight: 16.8 kg

Beans container capacity: 290g (x2)

Frequency: 2400/2483.5 MHz

Maximum transmission power 10 mW

DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY

FILL TANK WITH FRESH

WATER. USE REFILL FUNNEL

OR REMOVE WATER TANK

Insucient water in the tank

(A25)

. Press the button (A15), open the door (A16)

(g. 3), extract the tank and ll with fresh

water, then put back in the appliance and close

the door.

Alternatively, you can top up the tank by pour-

ing the water through the rell door (A23) and

checking the level through the transparent

window in the side of the tank. Important:

never pour water through the rell door

when the tank has been extracted

22. DISPLAYED MESSAGES

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Maestosa - EPAM960.75.GLM in the language / languages: English as an attachment in your email.

The manual is 6,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Maestosa - EPAM960.75.GLM

DeLonghi Maestosa - EPAM960.75.GLM User Manual - German - 38 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - Dutch - 31 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - French - 31 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - Italian - 30 pages

DeLonghi Maestosa - EPAM960.75.GLM User Manual - Spanish - 30 pages

DeLonghi Maestosa - EPAM960.75.GLM Additional guide - All languages - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi Maestosa - EPAM960.75.GLM Manual

Product: