770033
5
Zoom out
Zoom in
Previous page
1/19
Next page
10
15. Extract, empty and reposition the drip tray, then press
;
16. At the end of the sequence, press . The appliance
goes o.
Please note:
When turned on again the appliance asks for the circuit to be
lled: follow the instructions from point 3 of section "3. Setting
up the appliance".
6.4 General
Here you can nd the settings to customise the basic functions
of the appliance:
1. Press (B2) to enter the menu;
2. Press the scroll arrows (B3) or (B5) until
"General" is displayed;
3. Press (B4) to conrm;
4. Press the scroll arrows or until the required
item is displayed:
Set temperature:
To change the temperature of the water used to make the cof-
fee, proceed as follows:
Press (B4). The current value appears on the display
(D6) and the "New" value ashes;
Select the new value you want to set using the scroll ar-
rows (B3) or (B5);
5. When the required value (low, medium, high) has been
selected, press .
The display goes back to the previous screen.
Please note:
Varying the temperature has most eect for long beverages.
Water hardness
For instructions on identifying and setting water hardness, see
section "16. Setting water hardness".
Auto-o (standby):
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours
Press (B4). The current value appears on the display
(B1) and the "New" value ashes;
Select the new value you want to set using the scroll ar-
rows (B3) or (B5);
When the required value (15 min, 30 min, 1 hour, 2 or 3
hours) has been selected, press .
The display goes back to the previous screen.
Energy saving:
To disable or enable "Energy Saving", proceed as follows:
Press (B4). The current state ("Enabled" or "Disa-
bled") and the operation to be performed ("Disable?" or
"Enable?") by conrming with appear on the dis-
play (D6);
Press to disable or enable the function.
The display goes back to the previous screen.
Please note:
when the function is enabled, the "ECO" symbol appears
on the display.
When in energy saving mode, a few seconds elapse before
the rst coee, cappuccino or milk-based coee is deliv-
ered as the appliance must heat up again.
If the milk container (D) is inserted, "Energy Saving" has
no eect.
Beep:
Use this function to enable or disable the beep. Proceed as
follows:
Press (B4). The current state ("Enabled" or "Disa-
bled") and the operation to be performed ("Disable?" or
"Enable?") by conrming with appear on the dis-
play (D6);
Press to disable or enable the function.
The display goes back to the previous screen.
Default beverages
Use this function to reset the default values for all the beverag-
es, or the individual previously customised beverages.
Press (B4). The previously customised beverages
and "All" appear on the display (D6);
Select "All" to reset the aroma and quantity settings of all
beverages to the default values, or select the required bev-
erage, then press ;
To reset the default values, press .
The appliance conrms the reset and goes back to the pre-
vious screen.
Reset another beverage or press (B2) to exit the menu.
Default values:
Use this function to reset all the appliance and beverage settings
(apart from the language which remains as selected the rst
time the appliance was used).
4. Press (B4);
5. Press to reset all the settings;
6. The appliance conrms the reset and goes back to the pre-
vious screen.
Press (B2) to exit the menu.
6.5 Statistics
This displays statistics relating to the machine. To view the sta-
tistics, proceed as follows:
1. Press (B2) to enter the menu;
2. Press the scroll arrows (B3) or (B5) until
"Statistics" is displayed;
3. Press (B4): statistics on the appliance appear on the
display (D6), use the scroll arrows or to scroll
through the items;
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ESAM420.40 - Perfecta Evo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM420.40 - Perfecta Evo in the language / languages: English as an attachment in your email.

The manual is 13.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM420.40 - Perfecta Evo

DeLonghi ESAM420.40 - Perfecta Evo User Manual - Dutch - 21 pages

DeLonghi ESAM420.40 - Perfecta Evo User Manual - French - 20 pages

DeLonghi ESAM420.40 - Perfecta Evo User Manual - Italian - 20 pages

DeLonghi ESAM420.40 - Perfecta Evo User Manual - Spanish - 20 pages

DeLonghi ESAM420.40 - Perfecta Evo Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info