770033
3
Zoom out
Zoom in
Previous page
1/19
Next page
8
2.4 Description of the milk container
(page 2 - D )
D1. Lid with milk frother
D2. Froth adjustment and CLEAN dial
D3. Frothed milk spout
D4. Lid release buttons
D5. Milk intake tube
D6. Milk container
D7. Milk intake tube (under lid)
2.5 Description of hot water spout
(page 2 - E )
E1. Release button
E2. Spout
E3. Hot water connection nozzle
E4. Removable cover
3. SETTING UP THE APPLIANCE
Please note:
The rst time you use the appliance, rinse with hot water
all removable accessories which may come into contact
with water or milk.
The rst time you use the machine, the water circuit is
empty and the appliance could be very noisy. The noise
becomes less as the circuit lls.
Coee has been used to factory test the appliance and it
is therefore completely normal for there to be traces of
coee in the mill. The machine is, however, guaranteed to
be new.
1. Connect the appliance to the mains electricity supply (g.
1) and make sure the main switch (A9) at the back of the
appliance is in the I position (g. 2);
2. "Language": press the scroll arrows (B3) or
(B5) until the required language is displayed, then press
(B4) to conrm.
Follow the instructions indicated on the appliance display:
3. Remove the water tank (A12) (g. 3), ll to the MAX line
(marked on the tank) with fresh water (g. 4, then put the
tank back in the appliance (g. 5);
4. Check that the hot water spout (E) is inserted on the con-
nection nozzle (A15) (g. 6) and place a container holding
a minimum of 600 ml underneath (g. 7);
5. Press (B4) to conrm: The appliance delivers water
from the spout (g. 8) then goes o automatically.
Now rinse the milk circuit as follows:
6. Turn the machine on again by pressing the button
(A7) (g. 9). The appliance performs an automatic preheat
and rinse cycle which cannot be interrupted;
7. Fill the milk container (D6) with water up to the MAX level;
8. Place the lid back on the milk container;
9. If present, extract the hot water spout by pressing the re-
lease button (E1) (g. 18);
10. Attach the container to the connection nozzle and push
as far as it will go (g. 19). The machine emits a beep (if
enabled);
11. Turn the froth adjustment dial (D2) to the (no froth)
position;
12. Place a container with a minimum capacity of 600 ml
under the milk spout (D3);
13. Now deliver three consecutive "Hot milks":
ESAM42X.4Y: Press (B5) and select "Hot milk".
Then conrm by pressing (B4).
ESAM42X.8Y: Press (B11).
Please note:
At the end of each delivery, press (B2) to cancel the
clean milk container message.
14. Extract the milk container.
The coee machine is now ready for normal use.
Please note:
The rst time you use the appliance, you need to make 4 - 5
espresso coees before it starts to give satisfactory results.
1. To enjoy your coee even more and improve the perfor-
mance of your appliance, we recommend installing a water
softener lter (C4) as described in section "15. Water sof-
tener lter". If your model is not provided with a lter, you
can request one from De'Longhi Customer Services.
4. TURNING THE APPLIANCE ON
Please note:
Before turning the appliance on, make sure the main switch
(A9) on the back of the appliance is pressed (g. 2).
Each time the appliance is turned on, it performs an automatic
preheat and rinse cycle which cannot be interrupted. The appli-
ance is ready for use only after completion of this cycle.
Danger of burns!
During rinsing, a little hot water comes out of the coee spouts
(A16) and is collected in the drip tray (A22) underneath. Avoid
contact with splashes of water.
To turn the appliance on, press the button (A7) (g.
9).
After heating, the appliance automatically performs a rinse
cycle. As well as heating the boiler, this also heats the in-
ternal circuits by circulating hot water.
The appliance is ready for use when the main screen appears.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DeLonghi ESAM420.40 - Perfecta Evo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi ESAM420.40 - Perfecta Evo in the language / languages: English as an attachment in your email.

The manual is 13.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi ESAM420.40 - Perfecta Evo

DeLonghi ESAM420.40 - Perfecta Evo User Manual - Dutch - 21 pages

DeLonghi ESAM420.40 - Perfecta Evo User Manual - French - 20 pages

DeLonghi ESAM420.40 - Perfecta Evo User Manual - Italian - 20 pages

DeLonghi ESAM420.40 - Perfecta Evo User Manual - Spanish - 20 pages

DeLonghi ESAM420.40 - Perfecta Evo Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info