39
GB
DISPLAYED MESSAGES
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
FILL TANK! • The water tank is empty or
positioned incorrectly.
• Fill the tank with water
and/or insert it correctly,
pushing it as far as it will go
until it clicks into place.
GROUND TOO FINE ADJUST
MILL!
INSERT WATER SPOUT AND
PRESS OK
• The grinding is too fine and
the coffee is delivered too
slowly.
• The coffee maker is not able
to make coffee.
• Turn the grinding adjust-
ment knob one click clock-
wise towards "7" while the
coffee mill is in operation.
The effect is only visible
after delivering 2 coffees.
• Insert the hot water spout,
press the button and
deliver water from the
spout for a few seconds.
INSERT WATER SPOUT! • The water spout is not inser-
ted or is inserted incorrectly.
• Insert water spout as far as
it will go.
EMPTY GROUNDS CONTAINER • The grounds container (A9)
is too full or more than
three days have passed
since you last made coffee
(this guarantees correct
hygiene of the machine).
• Empty the grounds contai-
ner and clean, then replace.
Important: when removing
the drip tray, the grounds
container MUST be emp-
tied, even if it is not com-
pletely full. If this is not
done, when you make the
next coffees, the grounds
container may fill up more
than expected and clog the
machine.
INSERT GROUNDS CONTAI-
NER!
• After cleaning, the grounds
container has not been
replaced.
• Open the service door and
insert the grounds contai-
ner.
INSERT MILK CONTAINER! • The milk container is not
inserted.
• Insert the milk container as
far as it will go.
ADD PRE-GROUND COFFEE!
• The "pre-ground coffee"
function has been selected
without placing any pre-
ground coffee in the funnel.
• The funnel is clogged.
• Place pre-ground coffee in
the funnel.
• Empty the funnel with the
help of a knife, as described
in the section "Cleaning the
pre-ground coffee funnel".
