37
DESCALING
Descale the machine when the red light and
the message "DESCALE!" flash on the display.
Important!
Descaler contains acids which
may irritate the skin and eyes. It is vital to adhere to
the manufacturer’s safety warnings given on the
descaler pack and the warnings relating to the pro-
cedure to follow in the event of contact with the skin
and eyes.
NB!
Use De’Longhi descaler only. Under
no circumstances should you use sulphamic or
acetic based descalers. Their use invalidates the
guarantee. Failure to descale the appliance as
described above also invalidates the guarantee.
1. Turn the machine on.
2. Enter the settings menu by pressing the P
button.
3. Turn the selection dial until "Descaling" is dis-
played;
4. Select by pressing the button.
"Descaling Confirm?" is displayed. Press
again to activate the function.
5. The message "Add Descaler Confirm?" is dis-
played.
6. Before confirming, empty the water tank (A7),
then add the descaler diluted with water
according to the proportions indicated on the
descaler pack. Always use descaler recom-
mended by De’Longhi (contact De’Longhi
customer services). Place an empty container
with a minimum capacity of 1.5 litres under
the hot water spout (A19) (fig. 4).
Important!
Danger of burns. Hot water
containing descaler flows out of the hot water
spout. Avoid contact with splashes of water.
7. Confirm with the button.
8. The message "Descaling Underway..." is dis-
played. The descaling programme starts and
the descaler liquid is delivered from the water
spout. The descale programme automatically
performs a series of deliveries and pauses to
remove limescale deposits from inside the
machine.
After about 30 minutes, the message "Rinsing...
FILL TANK!" is displayed.
9. The appliance is now ready for rinsing
through with clean water. Remove the water
tank, empty, rinse under running water, fill
with clean water and replace. "Rinsing...
Press OK" is displayed.
10. Empty the container used to collect the desca-
ler solution and replace it under the hot water
spout.
11. Press the button to start rinsing. Hot
water is delivered from the spout and the
message "Rinsing..." is displayed.
12. When the water tank is completely empty, the
message "Rinsing Complete Confirm?" is dis-
played.
13. Press the button, fill the water tank
and the appliance is ready for use.
SETTING WATER HARDNESS
The DESCALE message is displayed after a period
of time established according to water hardness.
The coffee maker is factory set for a hardness
value of 4 (very hard water). The machine can
also be programmed according to the hardness of
the mains water in the various regions, varying
the frequency with which the message is displa-
yed.
Measuring water hardness
1. Remove the "TOTAL HARDNESS TEST" indica-
tor paper from its pack.
2. Immerse the paper completely in a glass of
water for about a second.
3. Remove the paper from the water and shake
lightly. After about a minute, 1, 2, 3, or 4 red
squares form, depending on the hardness of the
water. Each square corresponds to one level.
Setting water hardness
1. Press the P button to enter the settings menu.
2. Turn the selection dial to select "Water
Hardness".
3. Confirm the selection by pressing the
button (or the button to exit).
4. Turn the selection dial and set the level shown
by the indicator paper (see previous para-
graph).
GB
Level 1
Level 2
Level 3
Level 4
