Manual DeLonghi Eletta Cappuccino ECAM 45.766 (page 22 of 27) (English)

687411

Zoom out

Zoom in

1/27

Setting water hardness

1. Press the MENU/ESC (B14) button to enter the menu.

2. Press < (B4) or > (B8) (g. 9) and select “Water hardness”.

3. Conrm the selection by pressing the OK button (B12- g.

10).

4. Press < or > repeatedly to set the level as measured by the

indicator paper (see previous section).

5. Press the OK button to conrm the setting.

6. Press the MENU/ESC button to exit the menu.

The machine is now reprogrammed with the new water hard-

ness setting.

WATER SOFTENER FILTER

Certain models are tted with a water softener lter (C4). If this

is not the case with your model, you are recommended to pur-

chase one from De’Longhi Customer Services.

To use the lter correctly, follow the instructions below.

Installazione del ltro

1. Remove the lter (C4)

from the packaging;

2. Turn the date indicator

disk (see g. 46) until the

next two months of use

are displayed;

Please note

The lter lasts about two

months if the appliance is used

normally. If the coee machine

is left unused with the lter in-

stalled, it will last a maximum of three weeks.

3. To activate the lter, run tap water through the hole in the

lter as shown in the gure until water comes out of the

openings at the side for more than a minute (g. 47);

4847

0,5 L

4. Extract the tank (A16) from the appliance and ll with

water;

5. Insert the lter in the water tank and immerse it complete-

ly for about ten seconds, sloping it and pressing it lightly to

enable the air bubbles to escape (g. 48);

6. Insert the lter in the lter housing (A17- g. 49A) and

press as far as it will go;

7. Close the tank with the lid (A18- g. 49B), then replace the

tank in the machine;

49A 49B

When you install the lter, you must notify the appliance of its

presence.

8. Press the MENU/ESC (B14) button to enter the menu;

9. Press < (B4) or > (B8) (g. 9) until “Install lter” is

displayed;

10. Press the OK button (B12- g. 10).

11. “Install?” is displayed.

12. Press the OK button to conrm the selection. “HOT WATER

Press OK” is displayed.

13. Position a container under the hot water spout (C6) (min.

capacity: 500 ml).

14. Press the OK button to conrm the selection. The appliance

begins hot water delivery and the message “Please wait” is

displayed.

15. After the ow of hot water stops, the appliance automati-

cally resets to “Ready for coee” status.

The lter is now active and you can use the coee machine.

Replacing the lter

When “REPLACE FILTER” is displayed, after two months (see date

indicator) or when the appliance has not been used for 3 weeks,

you should replace the lter (C4):

1. Extract the tank (A16) and exhausted lter;

2. Take the new lter out of its packet and proceed as illus-

trated in points 2, 3, 4, 5, 6 and 7 in the previous section;

3. Position a container with a minimum capacity of 500ml

under the hot water spout (C6);

4. Press the MENU/ESC (B14) button to enter the menu;

5. Press < (B4) or > (B8) (g. 9) until “Replace lter” is

displayed;

6. Press the OK button (B12- g. 10);

7. The message “Conrm?” is now displayed;

8. Press the OK button to conrm the selection;

9. “HOT WATER Press OK” is displayed;

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of DeLonghi Eletta Cappuccino ECAM 45.766 in the language / languages: English as an attachment in your email.

The manual is 3.51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DeLonghi Eletta Cappuccino ECAM 45.766

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - German - 27 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Dutch - 20 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - French - 21 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Polish - 22 pages

DeLonghi Eletta Cappuccino ECAM 45.766 User Manual - Spanish - 21 pages

DeLonghi Eletta Cappuccino ECAM 45.766 Additional guide - All languages - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

DeLonghi Eletta Cappuccino ECAM 45.766 Manual

Product: